Will a elliptical bell dish work for paid iks?
Printable View
Will a elliptical bell dish work for paid iks?
Yes..........north & south
Tried it with my dream link and got no signal.Quote:
Originally Posted by The Noof
what are your settings and what kind of lnb(s) are on the dish?Quote:
Originally Posted by wilfredw
Don,know the lnb,s,up on the garage covered in snow.Not the lnb,s, the roof. It,s the ones that came with the dish.Maybe the signal is there but it,s red not blue.Which settings.Works fine on my digiwave dish.Quote:
Originally Posted by dishuser
Must have had wrong hook,fine now.Signal on 91 is a bit weak but ok.Quote:
Originally Posted by wilfredw
How many channels should scan in on 91?Quote:
Originally Posted by wilfredw
check lyngsat.comQuote:
Originally Posted by wilfredw
Does anyone actually know the exact amount.Lyngsat iis a pain in the.....
can't count past 10?Quote:
Originally Posted by wilfredw
I,m obviously not asking you.Have you had a look at lyngsat?Quote:
Originally Posted by dishuser
yes I didQuote:
Originally Posted by wilfredw
and there was more than 10
how about you count and contribute?
or is that too much effort?
If I had a guess, I,d say about 600. I,m sure there are others who already scanned them in and know the exact number.Quote:
Originally Posted by dishuser
it's been a few years but I think that is closeQuote:
Originally Posted by wilfredw
I thought it was closer to 575 but it might have changed
I only got 338 when I scanned, is that all I should get? As I said earlier,my signal is a bit weak.
you should get at least 200 moreQuote:
Originally Posted by wilfredw
go thru your tp list and check quality on them
Quite a few have poor signal,others have good signal but red signa not blue as it should be.
check your settingsQuote:
Originally Posted by wilfredw
Took a guess that my lnb setting should be for twin lnb,s and got over 600 channels scanned in.Thanks.
wilf,,if there snow on the eye of the lnb u will get no or very low sig,,,,,,
this thread is over a year old and solvedQuote:
Originally Posted by panmanzaa