Lost signal and quality

Anyone have an idea how all of the sudden i lost my signal intensity reads 22% and signal quality reads 10%. Ive never in all these yrs ever have this happen. I cant imagine 2 LNB' s go bad at the same time. Thanks

Yes it can happen, check to see if Dish moved, bad cabling, connections, bad switch, Ice/snow on LNB
Have to track it down on what's causing it.

Quote:

---

Originally Posted by auggie

Yes it can happen, check to see if Dish moved, bad cabling, connections, bad switch, Ice/snow on LNB
Have to track it down on what's causing it.

---

Don't forget the 8psk module too.

Quote:

---

Originally Posted by The Noof

Don't forget the 8psk module too.

---

Yes Noof, those 8psk modules in those Receivers Seem to be a "Common Problem" of over Heating etc.

That's why it is very important to have supplemental Cooling Measures (fans) in place on "ANY" receiver a person is using.

Mine did the same thing lost signal , the problem was the HD module.

Quote:

---

Originally Posted by auggie

Yes Noof, those 8psk modules in those Receivers Seem to be a "Common Problem" of over Heating etc.

That's why it is very important to have supplemental Cooling Measures (fans) in place on "ANY" receiver a person is using.

---

so are you saying my unit might be cooked then?

Quote:

---

Originally Posted by redrooster1

so are you saying my unit might be cooked then?

---

No maybe not, but you may need one of these: hxxps://www.ebay.com/itm/325817114014?_skw=JB+200+module&itmmeta=01JKKRJ3G9 397B1VE66WPE78XQ&hash=item4bdc369d9e:g:9WAAAOSwUal cD8lV&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJ Kn7QHqbv4OR%2BhkOJeeaCLNmLLE6pwK2di4EBi51qaUZD8dnN Dkyi8njdYjbpDWtpwtscrVgPeF1NL%2BV99gXpoP3HM2huUFh4 DY%2FGDPY5cOXKiw%2B2eNQuwMFTv5YcfTBJl3J8JmTEYEMqZy %2FFTmoI4CW4YIT19ppV%2BFwfD3%2BmbA9KxiEQV%2FkPSa%2 BG1CgxQ2qqeWc%2BF4P90U6UbUXfFP%2BvfapCPbUBp6ZXwA1N YQIcurDVll59Q5trdWL%2FbY62766hcg%3D%7Ctkp%3ABk9SR6 a4yPicZQ

They are a common Problem (Heat issues)

Quote:

---

Originally Posted by auggie

No maybe not, but you may need one of these: hxxps://www.ebay.com/itm/325817114014?_skw=JB+200+module&itmmeta=01JKKRJ3G9 397B1VE66WPE78XQ&hash=item4bdc369d9e:g:9WAAAOSwUal cD8lV&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJ Kn7QHqbv4OR%2BhkOJeeaCLNmLLE6pwK2di4EBi51qaUZD8dnN Dkyi8njdYjbpDWtpwtscrVgPeF1NL%2BV99gXpoP3HM2huUFh4 DY%2FGDPY5cOXKiw%2B2eNQuwMFTv5YcfTBJl3J8JmTEYEMqZy %2FFTmoI4CW4YIT19ppV%2BFwfD3%2BmbA9KxiEQV%2FkPSa%2 BG1CgxQ2qqeWc%2BF4P90U6UbUXfFP%2BvfapCPbUBp6ZXwA1N YQIcurDVll59Q5trdWL%2FbY62766hcg%3D%7Ctkp%3ABk9SR6 a4yPicZQ

They are a common Problem (Heat issues)

---

darn could not find that part in search.

Quote:

---

Originally Posted by redrooster1

darn could not find that part in search.

---

that link took me to this
Attachment 30350

Quote:

---

Originally Posted by redrooster1

darn could not find that part in search.

---

Go to Ebay and search for JB200 Module, or just do a Google search for the same, I also believe
it is available on Amazon as well.

Code:

---

https://www.ebay.com/itm/325817114014?_skw=JB+200+module&itmmeta=01JKKRJ3G9%20397B1VE66WPE78XQ&hash=item4bdc369d9e:g:9WAAAOSwUal%20cD8lV&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJ%20Kn7QHqbv4OR%2BhkOJeeaCLNmLLE6pwK2di4EBi51qaUZD8dnN%20Dkyi8njdYjbpDWtpwtscrVgPeF1NL%2BV99gXpoP3HM2huUFh4%20DY%2FGDPY5cOXKiw%2B2eNQuwMFTv5YcfTBJl3J8JmTEYEMqZy%20%2FFTmoI4CW4YIT19ppV%2BFwfD3%2BmbA9KxiEQV%2FkPSa%2%20BG1CgxQ2qqeWc%2BF4P90U6UbUXfFP%2BvfapCPbUBp6ZXwA1N%20YQIcurDVll59Q5trdWL%2FbY62766hcg%3D%7Ctkp%3ABk9SR6%20a4yPicZQ

---

I just checked on Amazon Canada, it is available there for $30 plus possible Duties etc.

if i remember correctly there is a way to bring back the HD modules. i think it has to do with the the caps and i cant remember which ones on the board that short out

Quote:

---

Originally Posted by intelpenny4

if i remember correctly there is a way to bring back the HD modules. i think it has to do with the the caps and i cant remember which ones on the board that short out

---

All the hardware on a JB200 is surface mounted, not conventional components.They are micro & require hot air stations,ect to perform component replace ment.That is beyond the scope of your average user.

Quote:

---

Originally Posted by The Noof

All the hardware on a JB200 is surface mounted, not conventional components.They are micro & require hot air stations,ect to perform component replace ment.That is beyond the scope of your average user.

---

Cheaper to just replace it, and spend the extra $$ on Cooling Measures (Fans etc.) to keep the unit cool in the first place.

I have said/posted anyone using "ANY" FTA receiver should have cooling measures in place.

Quote:

---

Originally Posted by auggie

Cheaper to just replace it, and spend the extra $$ on Cooling Measures (Fans etc.) to keep the unit cool in the first place.

I have said/posted anyone using "ANY" FTA receiver should have cooling measures in place.

---

are you saying to try and find a new unit and add a fan or replace that part.

Quote:

---

Originally Posted by redrooster1

are you saying to try and find a new unit and add a fan or replace that part.

---

Replace the HD Module (JB200) & get a set of USB Powered Fans to sit on top of receiver cover blowing air down &
sucking Hot air out, When I had my Jynxbox, I cut two 2" x 2" holes at opposite ends of receiver and placed a pair of usb fans
over them to keep the JB200 Cool & the other components inside as well, No Heat Issues

I have a set of these: hxxps://acinfinity.com/equipment-cooling/multifan-s5-quiet-usb-cooling-fan-dual-80mm/

Go to your satelite and down to manual and reset all channels to turbo and then rescan satelite it will work

Hey sorry people for the late thanks for all the help with my lost signal issue. Yes it turnrd out to be the JB200 module. Ordered on amazon and a fan to keep cool. and up in running. So thanks again to all that helped with suggestions really appreciate it. cheers