ismart hd receiver

Printable View

08-16-2017, 01:58 AM
weezer

ismart hd receiver

hello recently i was auto banned from a server this

pulling 2 sids and messing up 281 aug 15
2 channels is fine if dual tuner but one was messing up system the channel 218 and system auto banned you i have turned back on but please check your box for issues so it dont auto ban you again ,i have no idea what this means here are my specs for this receiver i never had this problem before

- iSmart-F1HD

iSmart-X10 TURBO
HD Digital Satellite Receiver

OVERVIEW

SPECIFICATIONS

PRODUCT SUPPORT

RELATED LINKS
Picture
Product Specifications:
General information
- Free to Air , Auto Scan/TP Scan/ Blind Scan
- Receiving Standard Definition and High
Definition TV and Radio channels
- TV Recording over USB drives (PVR-ready)*
- High Speed searching program
- Number of channels: MAX 5000 memory store
- EPG: up to 7-days based on SI information Physical
Specification
- Teletext supported, Support Favorites Group
- Energy saving, Standby mode less than 1W
- Multi-Languages Support, PAL & NTSC Auto conversion,
FULL HD Receiver
- Media Player supporting MPEG2, MPEG4, MKV, AVI, FLV,
JPEG, BMP, PNG, MP3, WMA ... ETC
- Software update over RS-232 Serial Port , By USB,
Satellite Front-End
- Modulation: Fully Compliant with DVB-S , DVB-S2
(MPEG4 , H.264)
- Input connector: F-connector LNB IN (KU/C BAND)
- Frequency range: 950-2150 MHz
- Symbol rate range: 2-90 MSPS
- Input level: - 25 to - 65 dBm
- LNB voltage: 13/18 V max 400 mA
- Tone control: 22 KHZ
- LNB Control: DiSEqC 1.0/1.2/1.3 USALS
- KU/C Band Supported

Video Decoding & Audio Decoding
- Audio Channel : Mute, Left, Right and Stereo , Joint Stereo
- Audio Decoding : MPEG-1 , MPEG-2 layer I and II & MPEG-4
- Video Resolution : High Definition & Standard Definition

Interfaces Input connector
- Satellite IF Input : F-type (LNB IN),
- 1 AV Port
- 1 x RS-232 Port
- HDMI Port
- USB (PVR & WiFi Dongle supported)

Front panel Interfaces
- Standby Power button, Menu, Ok,
Volume up/down
- Channel up/down and menu
navigation keys
- 4-character LED digits display
- 1 Standby LED Indicator
- 1 Signal LED Indicator
- IR Sensor
- CA "Multi CAS Card Reader"

Power Requirements
- Mains input voltage: 100V~250v
- Mains input frequency: 50 / 60 Hz
- Power consumption: Typ.: 8W MAX

Physical Specification
- Operating temperature: +5°C to +45°C
- Storage temperature: -20°C to +65°C
if someone knows anything about sids help would be much appreciated so i dont get autobanned again thanks
08-16-2017, 09:18 AM
nob0dy

it's called stacking ........ either you are doing it ..... or the service/sever thinks you are ...... eg: if you have more then one box & using it @ the same time .... you get auto-banned ........ or if you're sharing the service with someone else you get auto-banned ... not familiar with that box .... never heard of it ...... sid - station identification number aka secure id number ........ <~ old school ........

what i would do is contact you're service provider & explain what's going on ........ good luck :thumbsup:
08-16-2017, 09:12 PM
weezer

Quote:

Originally Posted by nob0dy

it's called stacking ........ either you are doing it ..... or the service/sever thinks you are ...... eg: if you have more then one box & using it @ the same time .... you get auto-banned ........ or if you're sharing the service with someone else you get auto-banned ... not familiar with that box .... never heard of it ...... sid - station identification number aka secure id number ........ <~ old school ........

what i would do is contact you're service provider & explain what's going on ........ good luck :thumbsup:

Ok thanks ya i have another box in garage so i must of left it on and went into house and turned on main receiver.never been a problem before usually only one will connect at a time.thanks
08-17-2017, 05:37 AM
nob0dy

Quote:

Originally Posted by weezer

Ok thanks ya i have another box in garage so i must of left it on and went into house and turned on main receiver.never been a problem before usually only one will connect at a time.thanks

no problem @ weezer ....... note: on third time .... it's banned 4 ever ....... unless they changed it & from my view it's still setup that way ......... 80% of services/servers work that way ....... good luck ..... :thumbsup:
08-17-2017, 08:23 PM
weezer

Quote:

Originally Posted by nob0dy

no problem @ weezer ....... note: on third time .... it's banned 4 ever ....... unless they changed it & from my view it's still setup that way ......... 80% of services/servers work that way ....... good luck ..... :thumbsup:

wow really good to know ive been using my two receivers with one code for years never been an issue i watch the one in garage when im outside having a beer then night time watch my main one in house.guess they are trying to make more money.its not like i have a buddy across town using my code .lol
08-18-2017, 02:43 AM
Dells

Quote:

Originally Posted by weezer

wow really good to know ive been using my two receivers with one code for years never been an issue i watch the one in garage when im outside having a beer then night time watch my main one in house.guess they are trying to make more money.its not like i have a buddy across town using my code .lol

It's a protection method against people resharing the service. If you just power down the box you're not using, then power up the other, it will never be an issue. But if you get a little drunk and forget, you may have it happen again.....happy beer in the garage drinking......lol
08-18-2017, 02:15 PM
weezer

Quote:

Originally Posted by Dells

It's a protection method against people resharing the service. If you just power down the box you're not using, then power up the other, it will never be an issue. But if you get a little drunk and forget, you may have it happen again.....happy beer in the garage drinking......lol

Lol ya that happens luv the mancave its sanctuary from the life in the house if you know what i mean.
08-24-2017, 04:01 AM
TurboPirate

Quote:

Originally Posted by weezer

hello recently i was auto banned from a server this

pulling 2 sids and messing up 281 aug 15
2 channels is fine if dual tuner but one was messing up system the channel 218 and system auto banned you i have turned back on but please check your box for issues so it dont auto ban you again ,i have no idea what this means here are my specs for this receiver i never had this problem before

- iSmart-F1HD

iSmart-X10 TURBO
HD Digital Satellite Receiver

OVERVIEW

SPECIFICATIONS

PRODUCT SUPPORT

RELATED LINKS
Picture
Product Specifications:
General information
- Free to Air , Auto Scan/TP Scan/ Blind Scan
- Receiving Standard Definition and High
Definition TV and Radio channels
- TV Recording over USB drives (PVR-ready)*
- High Speed searching program
- Number of channels: MAX 5000 memory store
- EPG: up to 7-days based on SI information Physical
Specification
- Teletext supported, Support Favorites Group
- Energy saving, Standby mode less than 1W
- Multi-Languages Support, PAL & NTSC Auto conversion,
FULL HD Receiver
- Media Player supporting MPEG2, MPEG4, MKV, AVI, FLV,
JPEG, BMP, PNG, MP3, WMA ... ETC
- Software update over RS-232 Serial Port , By USB,
Satellite Front-End
- Modulation: Fully Compliant with DVB-S , DVB-S2
(MPEG4 , H.264)
- Input connector: F-connector LNB IN (KU/C BAND)
- Frequency range: 950-2150 MHz
- Symbol rate range: 2-90 MSPS
- Input level: - 25 to - 65 dBm
- LNB voltage: 13/18 V max 400 mA
- Tone control: 22 KHZ
- LNB Control: DiSEqC 1.0/1.2/1.3 USALS
- KU/C Band Supported

Video Decoding & Audio Decoding
- Audio Channel : Mute, Left, Right and Stereo , Joint Stereo
- Audio Decoding : MPEG-1 , MPEG-2 layer I and II & MPEG-4
- Video Resolution : High Definition & Standard Definition

Interfaces Input connector
- Satellite IF Input : F-type (LNB IN),
- 1 AV Port
- 1 x RS-232 Port
- HDMI Port
- USB (PVR & WiFi Dongle supported)

Front panel Interfaces
- Standby Power button, Menu, Ok,
Volume up/down
- Channel up/down and menu
navigation keys
- 4-character LED digits display
- 1 Standby LED Indicator
- 1 Signal LED Indicator
- IR Sensor
- CA "Multi CAS Card Reader"

Power Requirements
- Mains input voltage: 100V~250v
- Mains input frequency: 50 / 60 Hz
- Power consumption: Typ.: 8W MAX

Physical Specification
- Operating temperature: +5°C to +45°C
- Storage temperature: -20°C to +65°C
if someone knows anything about sids help would be much appreciated so i dont get autobanned again thanks

If it is the X10 Turbo it is just another clone of the JynxBox, same JB200 tuner.......
10-04-2017, 02:25 PM
craigg

I know this thread is a few weeks old but just wanted to chime in that my neighbor had a similar issue with his jyxebox a while back he only has 1 receiver and said he was flipping back and forth from a few channels using the last channel button on remote then it froze up and so he reset his iks then after the reset he couldn't connect to server come to find out he had been auto banned by server they told him to rescan his channels because it could cause this sometimes he did and never had the problem again. They were not sure what causes this to happen but said it has happened before occasionally to other people running the jynxbox and to becareful it didn't happen again or he could be permanently banned from the server because it still causes issues with their server, even though it was out of his control.