i have a smaller 5 way lnb elipictdiall im trying to get 119w,110w sats,i have a sat meter???whitch one-
do i put on first ,119w or 110w???? thanks appr help.panmanzaa.
Printable View
i have a smaller 5 way lnb elipictdiall im trying to get 119w,110w sats,i have a sat meter???whitch one-
do i put on first ,119w or 110w???? thanks appr help.panmanzaa.
what are the other 3 for?
Use the lnb closest to centre, make sure skew or tilt is set for your location.
have a look here hxxps://www.dishpointer.com/
For your location and what Sat's to point at with different Dish setups
5 way LNB??? Do you mean 5 LNB's in one....Or 5 LNBs on one dish???
It all depends on the spacing for the LNB(s), the two satellites (110/119) are 9 degrees apart, you would need two LNB's with that spacing, the two LNB's your using should be the two closest to the center of the dish, then you would point them and the dish in-between the two satellites at 114.5 degrees.
Dishpointer will help you out with this as Auggie mentioned, just enter your location and select the multi satellite option, then select 110/119.
Also, the two LNB's you select will be criss-crossed from each other, looking from behind the dish, 110 LNB will be on the right, and the 119 LNB will be on the left.
So on your Diseqc switch settings, (You will need a switch with two separate LNB's)(or an LNB with internal switching)Diseqc port #1 should be for 119, and Diseqc port #2 should be for 110
If that is the LNB he has then he will have to point it and peak on 103W.
i think i did allthe things to get in 119w-110w in ,my appolidges its been so long since i tried to get it skewed in ,i forgot whitch sat
sat i should put in first& what direction to skew clock wize or anti clock? &would u be sooo kind to tell me each step by stept up &down &side by side,i have 2 seperate lnbs in the center of dish ,standing in back of dish.i now have 110w sat working,but on 119w lnb,cant get119w to work. this is very simple for your wonderfull tec ability.appr support.thanks.panmanzaa.