Originally Posted by
henric
C/P.
Yes the z500 has the ability to go private.
Do this for setting up the Satzen for P..
With your remote click these.....Menu>Network>Net Application
1-Once your into Net Application at top of screen use remote and right arrow and move it to Dream.
2-Scroll down to Server No. and set it to whichever server number you desire.
3-Go down to SoftCam and set it to NewCamd.
4-Next go down to Server and enter the server name or IP address.(With remote click on OK to bring up keypad....to switch back and forth from capital letters to lower case letters press red audio button on remote) When done press exit button and you will see on keypad that OK is highlighted...press it and exit out.
5-Scroll down to port and enter port numbers and press ok and exit out.
6-AU is off.
7-Go to Authorization and click OK.
8-Enter User ID, exit and click OK.
9-Enter Password, exit and click OK.
10-Enter DES Key, exit and click OK.
11-Exit out of menu and put it on a working channel (200 for example) and wait for it to kick in.