Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: viewsat pro frozen at boot

  1. #1
    Join Date
    Nov 2012
    Posts
    1
    Satfix Buxs
    15
    Thanks
    0
    Thanked 0x in 0 Posts

    Default viewsat pro frozen at boot

    any ideas on how to relieve frozen viewsat box. currently frozen at boot.

  2. #2
    Join Date
    Sep 2012
    Posts
    2,586
    Satfix Buxs
    40,980
    Thanks
    8,598
    Thanked 3,676x in 1,512 Posts
    Items USACrown RoyalDishFootballbeerBirdImmunity to TheftMexico

    Default

    Quote Originally Posted by Aharrisman View Post
    any ideas on how to relieve frozen viewsat box. currently frozen at boot.
    friend if it froze up,try downloading the factory file for that receiver,with the rs232 cables that came with your receiver,that should help you if it froze up,good luck friend....

  3. #3
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    I have a VS Pro frozen at boot but can't find the loader nor the factory file in this forum's file section. This section is totally empty. Please, help!

    Quote Originally Posted by steven charles View Post
    friend if it froze up,try downloading the factory file for that receiver,with the rs232 cables that came with your receiver,that should help you if it froze up,good luck friend....

  4. #4
    Join Date
    Oct 2012
    Posts
    600
    Satfix Buxs
    4,508
    Thanks
    82
    Thanked 166x in 106 Posts
    Items HeadstonesTV

    Default

    Quote Originally Posted by JoseM View Post
    I have a VS Pro frozen at boot but can't find the loader nor the factory file in this forum's file section. This section is totally empty. Please, help!
    Search google. There is a few places to get those files. What are you using a pro for? They don't work with IKS.

  5. The Following User Says Thank You to dcapper For This Useful Post:


  6. #5
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    Thanks. I'm using the pro for true fta. I found the files but I can't load them to the box. I open the loader and follow the instructions to the point but it never passes the "Reset" screen. And the receiver's panel doesn't change from "boot". What else can I do?

    Quote Originally Posted by dcapper View Post
    Search google. There is a few places to get those files. What are you using a pro for? They don't work with IKS.

  7. #6
    Join Date
    Oct 2012
    Posts
    600
    Satfix Buxs
    4,508
    Thanks
    82
    Thanked 166x in 106 Posts
    Items HeadstonesTV

    Default

    Quote Originally Posted by JoseM View Post
    Thanks. I'm using the pro for true fta. I found the files but I can't load them to the box. I open the loader and follow the instructions to the point but it never passes the "Reset" screen. And the receiver's panel doesn't change from "boot". What else can I do?
    It's in a boot loop just keep trying. There is a usb way to do it but I can't remember how.

  8. #7
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    Thanks for the reply. I put a usb with only the factory bin in it and turned the box on from the switch in the back but it did nothing. I have done the loader procedure a lot of times but it does not come out of that boot loop. I will keep trying. If you remember the usb way please let me know. Thanks!

    Quote Originally Posted by dcapper View Post
    It's in a boot loop just keep trying. There is a usb way to do it but I can't remember how.
    Last edited by JoseM; 03-19-2014 at 01:12 AM.

  9. #8
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    I've tried to load the factory bin thousands of times but it does not work. VS Pro still with only the word "boot" on the front panel. I don't know what else to do.

    Quote Originally Posted by JoseM View Post
    Thanks for the reply. I put a usb with only the factory bin in it and turned the box on from the switch in the back but it did nothing. I have done the loader procedure a lot of times but it does not come out of that boot loop. I will keep trying. If you remember the usb way please let me know. Thanks!

  10. #9
    Join Date
    Oct 2012
    Posts
    600
    Satfix Buxs
    4,508
    Thanks
    82
    Thanked 166x in 106 Posts
    Items HeadstonesTV

    Default

    Quote Originally Posted by JoseM View Post
    I've tried to load the factory bin thousands of times but it does not work. VS Pro still with only the word "boot" on the front panel. I don't know what else to do.
    Taken from another place (It's for a VS9000HD but should work):

    I will not bore you with the story behind my pain for two day’s but I will teach you how to get out of BOOT-LOOP with a VS9000HD receiver using the correct tools.

    1. Make sure that you are in fact suffering from BOOT-LOOP. (BOOT) will be steady on your display and not move to the time setting.

    2. Make sure that you have a Laptop and a NULL cable to connect between the Laptop and the receiver. REMOVE the receiver from all connections.

    3. Find a solid copy of BOOT-LOADER 2 and (9000HDBoot fix_v2.pgm) to recover your VS9000HD receiver.

    4. Connect the NULL cable to the receiver and Laptop and don’t power the receiver on at this time.

    5. Launch BOOT-LOADER 2 from your laptop and open the file (9000HDBoot fix_v2.pgm)
    make sure that you select (PC-STB) and click (OK).

    6. Once the 9000HDBoot fix_v2.pgm) STARTS: turn on the receiver this will take about 6 seconds to get under way. Now because the fix file is about 33mb it will take some time to complete. My first try it took about 45 minutes but it works. You will see the indicator bar get out of sync and do strange stuff, don’t worry about what you see just let it finish.

    7. When completed you will see completed on the laptop screen so select OK and turn the VS9000HD receiver OFF.

    8. Locate a good copy of the (VS9000HD FIRMWARE) and load it into the laptop the same way you did with the (9000HDBoot fix_v2.pgm) file. Start the file and turn the receiver ON.
    and let it complete. The receiver will now reboot and you will feel joy. Disconnect every thing and reconnect the receiver back to the Satelitte position.

    9. You are now back to normal and at this point you can load the current bin file via USB or the laptop as you wish.

    Tools you will need.

    A fast Laptop with a NULL cable.
    The Application BOOT-LOADER 2.
    The file 9000HDBoot fix_v2.pgm).
    The file Viewsat 9000HD Factory Bin File - V1007 or V1005.
    The copy of the latest bin file, you can load this vis USB.
    And lots of good friends to help you with making decisions.

    Hope this helps you with your BOOT problem.

  11. #10
    Join Date
    Oct 2012
    Posts
    600
    Satfix Buxs
    4,508
    Thanks
    82
    Thanked 166x in 106 Posts
    Items HeadstonesTV

    Default

    Here is the USB way taken from another place:

    1. 'Power Off' with the back panel switch
    2. disconnect antenna
    3. on USB Drive:
    * copy current Release bin
    * create a directory "USB"
    * copy Factory bin to "/USB/PFTAHDSW.pgm"
    4. plug USB Drive into front port
    5. with only a TV connected, 'Power On' with the back panel switch
    6. the display shows: "BOOT", "CHECK USB", "DOWNLOAD"
    7. when the display shows: "ERASE" - pull the USB Drive out
    8. wait for unit to complete Erase, Program and re-boot (Notes #3, 4)
    9. Factory Default
    10. plug USB Drive into front port
    11. Receiver Upgrade=>USB Release bin
    12. wait for reboot
    13. Factory Default
    14. 'Power Standby' with remote or front panel switch, wait 5 sec.
    15. 'Power Off' with the back panel switch
    16. reconnect antenna
    17. 'Power On'
    18. setup Options
    19. see Setup Antenna & Scan Satellites below

  12. #11
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    Do I have to rename the Factory bin to "PFTAHDSW.pgm"?

    Quote Originally Posted by dcapper View Post
    Here is the USB way taken from another place:

    1. 'Power Off' with the back panel switch
    2. disconnect antenna
    3. on USB Drive:
    * copy current Release bin
    * create a directory "USB"
    * copy Factory bin to "/USB/PFTAHDSW.pgm"
    4. plug USB Drive into front port
    5. with only a TV connected, 'Power On' with the back panel switch
    6. the display shows: "BOOT", "CHECK USB", "DOWNLOAD"
    7. when the display shows: "ERASE" - pull the USB Drive out
    8. wait for unit to complete Erase, Program and re-boot (Notes #3, 4)
    9. Factory Default
    10. plug USB Drive into front port
    11. Receiver Upgrade=>USB Release bin
    12. wait for reboot
    13. Factory Default
    14. 'Power Standby' with remote or front panel switch, wait 5 sec.
    15. 'Power Off' with the back panel switch
    16. reconnect antenna
    17. 'Power On'
    18. setup Options
    19. see Setup Antenna & Scan Satellites below

  13. #12
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    I tried it renaming and not renaming the factory bin file but no good. Front panel never goes beyond "boot". Also tried it inserting the usb in the front and in the rear ports. Didn't work either way.
    Last edited by JoseM; 03-19-2014 at 07:36 PM.

  14. #13
    Join Date
    Oct 2012
    Posts
    600
    Satfix Buxs
    4,508
    Thanks
    82
    Thanked 166x in 106 Posts
    Items HeadstonesTV

    Default

    Quote Originally Posted by JoseM View Post
    Do I have to rename the Factory bin to "PFTAHDSW.pgm"?
    No. That is for the HD box. But it should be smething like PFTA????.pgm

  15. #14
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    Ok. I will google it to see if I can find it. Thanks!

    Quote Originally Posted by dcapper View Post
    No. That is for the HD box. But it should be smething like PFTA????.pgm

  16. #15
    Join Date
    Jul 2013
    Posts
    20
    Satfix Buxs
    10
    Thanks
    3
    Thanked 5x in 4 Posts

    Default

    Can't find it.

    Quote Originally Posted by JoseM View Post
    Ok. I will google it to see if I can find it. Thanks!

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •