I have the Dreamlink HDMI SD I am missing 239 and the lower channls is there a chnnel list? or how can I get the rest of the channels.
I have the Dreamlink HDMI SD I am missing 239 and the lower channls is there a chnnel list? or how can I get the rest of the channels.
If you are missing the channels I would check my dish for alignment and then rescan should bring the listings to your box. Whether they are viewable would depend on what p$ you are using. Hope this helps.
dreamlink sd hdmi dish 500 110/119
Latitude 2x.5100, Longitude xx,2188 (Location)
Elevation 43.4
Azimuth (true) 228.1
Azimuth(magn) 234.3
LNB Skew 40.4
Last edited by anyonomus; 04-25-2014 at 02:24 PM. Reason: not good to post your "exact" location.. unnessary info.
please post your sat settings as they appear on your screen for each sat involved.
Luca Brasi Swims With me
whats the meaning of P$ and I cannot get 239 or 138
Echostar 10/11 blue bar S 85% Q 97%
110
LNB Power On
LNB Type OCS-DP
LNB Frequency 11.250
LNB 22KHz Off
DISEQC SW 1.0 1
DISEQC SW 1.1 OFF
Legacy SW OFF
119.0W Echostar 14 S 28% Q 21%
LNB Power On
LNB Type OCS-DP
LNB Frequency 11.250
LNB 22KHz OFF
DISEQC SW 1.0 2
DISEQC SW 1.I OFF
Legacy SW OFF
Iam using two single inbs with a switch
---------------------------------------------------------
Thanks for everything and the years of fun and friendship!!
I tested each LNB and all good and I have a new switch, went ahead and put CH LIST-C.LDB on system I have a Dreamlink SD (HDMI) Oct 23 2012 I am getting the missing channels but no picture Scramble Channel, what can be done, all other channels are good but the missing ones are bad ?
You have two single lnbs???OCS-dp is for dishpro lnbs.