Can't say yes or no you will just need to try . Remember to turn it off and on a couple of times so it will lowed what it needs to in the boot founder . Let us know if it works for you.
Wireless Networking
1. How do I add native wireless support to my CW-LMC?
As of the 1.0.1.17 software release a wireless device driver has been included for a specific chipset.
To add native wireless support to your CW-LMC you would need to connect a wireless device that uses the RT-3070 chipset.
Instructions for setting up this style of wireless networking can be found in the user manual.
2. I dont have a RT-3070 wireless device. Is there another way to set up wireless networking?
If your CW-LMC does not have a RT-3070 wireless device.
Wireless networking can be achieved through the use of a "Wireless Gaming Adapter" or Wireless bridge.
These devices connect to the ethernet port and provide a bridge to a wireless network.
Here is a thread on the forum containing further info:
How to set up a wireless network
Many users have picked up a couple of WRT54G wireless routers, flashed them with the open-source DDWRT firmware to uncover the ability to enable bridge mode and set up a relatively inexpensive bridged wireless system.
Step by step setup on using 2 lynsys routers
I will look for the thread the teem talks about with the way back and see if it is still there . If so I will post it.
Code:
http://web.archive.org/web/20100613091810/http://captiveworks.org/forum/comments.php?DiscussionID=23