I AM USING THE WIZ PROGRAM....And trying to upload the Svlan 4.12FW FILE...
I hooked up my wiz110sr to my cable (Don't know really if it is the right one or not...!!! I am using a straight thru cable that I have used for my pansats and such I bought a adapter that has the female ends on it so I could hook it up to my computer ...and receiver when I get it working correctly .....
(1) don't know how to check the cable to see if it is the right one or not I have ohm meter and all but don't know how the pin out is .....
(2) when I hook up the wiz110sr to the computer using the wiz program I click on the serial tab. check the baud rate speed and mine says 115200 it also gives me the Ip's and etc ....it also says at the top left the 4.12 file is already there from the factory I guess ...but I try and upload the file to make sure that it is there and it wont let me says time out or something to that effect.....and I hook it up to the sonicview receiver to see if I can connect and it doesn't "says no signal I believe" .....So evidently the wiz110sr is not programed for some reason .....and it wont let me program it .....I am at a stand still I don't know if it is a cable issue or if it is something else .......
help if you can I have been with out tv for to long .....heheahah
........TTTTTTTTTHHHHHHHHHHHHHAAAAAAAANNNNNNNNNKKK KKKKKKKKKSSSSSSSSSSSSSSSSS
In advance ........thanks again for help.....showhorse
p.S The lights on the wiz110sr lights up and blinks when I connect it to the receiver but that is all and network settings isn't in the menu either ..........I want to give special thanks to (abouttosnap) for all his help so far with me .................PPs....do I have to power up the wiz100sr when I am trying to program it in wiz loader ????