Results 1 to 5 of 5

Thread: trying to get back into things, Sat problems, High signals no channels not even free

  1. #1
    Join Date
    Oct 2012
    Posts
    31
    Satfix Buxs
    696
    Thanks
    0
    Thanked 8x in 2 Posts

    Default trying to get back into things, Sat problems, High signals no channels not even free

    Been a few years since I played around with my limesat hd air. Forgot everything about it. Cement new dish into the ground. Temp only have sat 119 plugged in with only 1 wire to dishpro LNB. Then moved wire to other LEG LNB's.

    1st problem looking up dish pointing setting points (70542) it says skew is at -7, there is no -7 skew on my dish, goes down to -40. I hooked up little sat meter and moved it around till i got a signal. (set skew at 90). Getting 97 strength and 95 to 97 quality but sat does not lock in (stays red, bars do not go green). Tried on 118, 123, 110 and all sats show high quality and strength but not 1 locks in and will not pick up any channels on scan. Not even the free one like 100 or preview.

    Installed newest file Limesat_HD_AIR_v130. Subbed to a new rocket, put in all info and unit says server is connected (hard wire cat5). How ever IP, DNS, all info on that screen does not populate. Stuck at searching. Go back into network settings and rechecked, says connected. I disconnected and reconnected several times and still will not populate info.

    What are my options before i buy a new system?

  2. #2
    Join Date
    Sep 2012
    Posts
    16,241
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,716
    Thanked 27,831x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    Quote Originally Posted by stevenhayes View Post
    Been a few years since I played around with my limesat hd air. Forgot everything about it. Cement new dish into the ground. Temp only have sat 119 plugged in with only 1 wire to dishpro LNB. Then moved wire to other LEG LNB's.

    1st problem looking up dish pointing setting points (70542) it says skew is at -7, there is no -7 skew on my dish, goes down to -40. I hooked up little sat meter and moved it around till i got a signal. (set skew at 90). Getting 97 strength and 95 to 97 quality but sat does not lock in (stays red, bars do not go green). Tried on 118, 123, 110 and all sats show high quality and strength but not 1 locks in and will not pick up any channels on scan. Not even the free one like 100 or preview.

    Installed newest file Limesat_HD_AIR_v130. Subbed to a new rocket, put in all info and unit says server is connected (hard wire cat5). How ever IP, DNS, all info on that screen does not populate. Stuck at searching. Go back into network settings and rechecked, says connected. I disconnected and reconnected several times and still will not populate info.

    What are my options before i buy a new system?
    only 1 thread per topic needed
    and this section isn't for sat help

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  3. The Following User Says Thank You to dishuser For This Useful Post:


  4. #3
    Join Date
    Oct 2012
    Posts
    874
    Satfix Buxs
    37,249
    Thanks
    234
    Thanked 236x in 182 Posts

    Default

    Will populate with a DN donation!!

  5. #4
    Join Date
    Dec 2010
    Posts
    12,184
    Satfix Buxs
    27,719
    Thanks
    20,496
    Thanked 21,237x in 6,877 Posts
    Items Martini
Gift received at 12-13-2013, 03:34 PM from swanner
Message: Congradulations Anubis on your 10,000 Post.
Celebration Time, Keep up the good work BudSome beer
Gift received at 07-18-2013, 04:52 PM from marcelect
Message: wHAT COMES AROUND GOES AROUND.HAvein this heat wavethis cold oneFriesPizzaBurgerBeefTrophy 3
Gift received at 12-15-2012, 11:21 AM from ICEMANFootball
Gift received at 11-06-2012, 03:44 AM from Styx_N_Stones
Message: After your comment about...

'lol I gave him a couple g's and he blew it all in a matter of hrs'

I didn't want you to think I was spending the money on myself. That's why I posted a reply explaining where the SatFix Bux went.

Here's a little token of my gratitude for your generous donation. Please accept it in the spirit that its meant...

S_N_S

    Default

    Thread moved to appropriate area.

  6. #5
    Join Date
    Oct 2012
    Posts
    1,871
    Satfix Buxs
    12,439
    Thanks
    4,055
    Thanked 2,052x in 934 Posts

    Default

    Quote Originally Posted by stevenhayes View Post
    Been a few years since I played around with my limesat hd air. Forgot everything about it. Cement new dish into the ground. Temp only have sat 119 plugged in with only 1 wire to dishpro LNB. Then moved wire to other LEG LNB's.

    1st problem looking up dish pointing setting points (70542) it says skew is at -7, there is no -7 skew on my dish, goes down to -40. I hooked up little sat meter and moved it around till i got a signal. (set skew at 90). Getting 97 strength and 95 to 97 quality but sat does not lock in (stays red, bars do not go green). Tried on 118, 123, 110 and all sats show high quality and strength but not 1 locks in and will not pick up any channels on scan. Not even the free one like 100 or preview.

    Installed newest file Limesat_HD_AIR_v130. Subbed to a new rocket, put in all info and unit says server is connected (hard wire cat5). How ever IP, DNS, all info on that screen does not populate. Stuck at searching. Go back into network settings and rechecked, says connected. I disconnected and reconnected several times and still will not populate info.

    What are my options before i buy a new system?
    What is "then moved wire to other leg"

    If your dish goes to minus 40 (-40) then turn it back 33 = -7

    You could let us know what l n b or how many you have or what dish you have?

    Also let us know what antenna settings. example 119=disq #1 ...110 = disq #2

    Check with rocket as to what ip you should use with limesat.

    Good working box is dreamlink t5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •