Have new one working now. Will see what I can find on cloning.
Have new one working now. Will see what I can find on cloning.
How to Clone a SonicView to another Sonicview
Have the Master box power "ON" and the Slave box power "OFF" completely
Connect Master & Slave box with Null Modem cable, Using remote control unit pointing at the Master and press
Yellow Button and #4 (#1=Main software, #2=Channel List, #3 Bootloader, #4=ALL)
Now power up the SLAVE BOX by using the rear power switch and you should see it start transferring.
Wait until it finishes and reboots and you're set to go.
It's been awhile since I've did it, but i believe just receiver to rec. no tv hook up
Master Box over to Slave Box, Null cable connection nothing else, Hold Yellow and #4 buttons while you turn on the second receiver, and watch the front panels of receivers for any action, info from Good Box should transfer over to the other one
If nothing happens then i would say the one receiver is TOAST
Using a different cable that I would believe is a null cable, found it in my SV360 Premier bag. Still cannot get any action from either receiver.
Have confirmed that I am using a null cable. Still cannot get it to work. I believe I am doing something wrong, but have done a search here and on the web and I cannot find any different instructions than what auggie provided. Not sure when to release the buttons and what indications are that show it is working.