Limesat hd air

[redrocker]

all stars on front panel display ..
no boot

Is there a fix>??thnx

[dslchome]

all stars on front panel display ..
no boot

Is there a fix>??thnx

Try this and do with cable

1.Start loader and set com port.

2.Select file to load. ** Make sure you use correct bin **

3.Reboot box and hold power button on box in for at least 5 seconds while rebooting boot should freeze in display.

4.Press start on loader and file should begin transfer. When countdown is less than 4 digits numbers are prefixed by letter A.

5.When display hits zero should change to -E5- WAIT !!!! display on loader should be at 90% at this point.Receiver should then start counting down prefixed with a "P". I assume that is for 'PROGRAMMING'

6.When receiver displays -End- wait a few seconds, look at loader program should now be complete, and then reboot box.


Also you can try removing all cables let it set from 15 to 30 mins, and rehook and see if that corrects issue...