-
Prosat HD Manual tp scanning option
Menu button (remote)
Installation
Channel search
Example below:
================================
Mode/ switch from Auto to Manual
Tuner/ Tuner1(DVB-S)
Satellite Name/ Per scan (119) Note: Should be set per your setup prior to scan.
Frequency/ 12297
Symbol Rate/ 21500
Polarity/ Horizontal
Modulation/ 8PSK Turbo
FEC/ 2/3
Network Search/ Disable
Search Type/ All
Channel Type/ All
=================================
Start search (blue button)
After the tp scan repeat for additional tp's changing settings as needed.
Possible stb lock up and or reboot during this process...nature of the beast.
Also can be done through Antenna Setup and Motor Setup.
Once in one of these options do a Search (blue button) first
then setup as above and then Start search (blue button)
Last edited by abouttosnap; 08-20-2015 at 06:58 AM.
Reason: added info
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules