Does anyone know how to scan new tp's for limesat air hd. 110 and 119
Does anyone know how to scan new tp's for limesat air hd. 110 and 119
Scan new TP's:
1) Menu, Installation, Auto Scan, Scan (Press the red button on the remote), Note: Make sure the desire satellite is selected before the scan.
If you want to delete the old frequency's before the new scan:
1) Menu, Installation, Manual Scan, Satellite (select the desired satellite in this case 110W with the ok on your remote), Frequency (Press the yellow button on the remote and select yes) delete one by one. NOTE: Do not delete frequency 12.224 and edited as (12.224 GHz, 21.500 MS/s, H, TURBO 8PSK, FEC AUTO), Exit (Press the exit button on the remote and is going to auto save)
2) Menu, Installation, Auto Scan, Scan (Press the red button on the remote), Note: Make sure the desire satellite is selected before the scan.
Note: For 119W use 12.311 GHz, 21.500 MS/s, V, TURBO 8PSK, FEC AUTO. Note: at least you need to have one Frequency to execute the Auto Scan.
Delete channels:
Menu, Channel List, Edit Channels, Sat (Press the sat button on the remote), Select all satellite or the desired one, Edite Mode (Press the green button on the remote), Delete All Channels (TV channels).
For radio channels (Press the TV/radio on the remote), Edite Mode (Press the green button on the remote).
12.224 shows i have no Quality or signal at all. do i still scan it or what do i need to do?
Thank You
missing channels
did a auto scan with network on
only missing a few unless these channels moved
197,191
Unless it is disque switch - I am using a ROYAL
Turn on auto tp.mine updates
I do a auto scan every 1-2 weeks with mine. edlkll