Hello gang, having issues with a JX Lite, I have changed LNBs, DiSEq, SW21 I tried DiSEq V1.0, 1.1, 2.0 all the same, also changed the JB200 module with 2 more and 1 JB200+ the 650 mili amps and get the same problem, NO SIGNAL only 1 SAT has signal, first I tried what I found connected and owner said it was like that for more than a year
119 Port 1
110 Port 2
58 Port 3
Only 58 has signal, I installed 1 new CalAmp LNB on 119 and left the 110 disconnected, turned the JX ON (side killer switch) checked the settings all the same, only 58 had signal, changed the DiSEq switch V1.0 for another brand new, checked again same problem, change the 58 to Port 1 and 119 to Port 3 checked and I thought I was going to have signal of the 119 in Port 3 but no, none had signal, owner went and got brand new CalAmp LNB and brand new linear LNB Digiwave Standard, connected all and no signal, changed the JB200 same thing, changed the Ports with 119 on all 4 ports and on all it has signal as long there is no other LNB connected to the switch, tried the same with 110 and with 58, I can change the Port settings from 1 to 4 and where the single LNB is connected will give me signal once I connect another LNB it all go to No Signal, tried with SW21, DP33 and DP34 all the same, tried with JB200+ 650 miliamps, no difference at all, the only thing I didn't tried was the JynxBox external power supply for another, maybe the problem is there or...........? What you guys think? TP
Another question, how many volts is the fan this JynxBox Ultra Lite have?