Bell satellite dish

[beefcake]

Hi i'm useing a bell satellite dish and stopped getting a signal there is no switch that i can see and it has a twin lnb . there is a cable comming from each lnb but only one cable is used to go directly to the reciever. It worked great for a year then i just stopped getting a signal Thanks

[nob0dy]

Hi i'm useing a bell satellite dish and stopped getting a signal there is no switch that i can see and it has a twin lnb . there is a cable comming from each lnb but only one cable is used to go directly to the reciever. It worked great for a year then i just stopped getting a signal Thanks

most common problems are the following ::

loose connections eg: make sure all coax & hdmi connections are tight & or secure ........ from dish , to stb ......

wind moved dish ...

something is the line of sight of the dish & is being blocked

bad LNB(s)

coax cable is bad or damaged

switch blew ...

diseqc blew ....

[beefcake]

Thanks but NOBODY i can't see a switch is there a built in switch on it cause the lnb's are made together thanksaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa.JPG

[dishuser]

Thanks but NOBODY i can't see a switch is there a built in switch on it cause the lnb's are made together thanksaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa.JPG

ya it has a builtin switch

[DJMark]

Where do you live? Is there snow on the dish?

[beefcake]

can that switch be replaced one other thing could it be the ports i can't find the ports on the t5 thanks

[dishuser]

can that switch be replaced one other thing could it be the ports i can't find the ports on the t5 thanks

you need to set up switch settings
91=1
82=2
or
119=1
110=2

[nob0dy]

the switch is built into the head of the LNB ....... if you replace the LNB you replace the switch ......... " if " thats the problem .......... who installed your dish ?





Do you see any switches like the one's below in the photo ?

[beefcake]

This is the first time i used a bell dish it was here when i moved here. I had this local guy come over and set it up for 110 and 119 and it worked great for a year with a full signal . The lnb is like in picture 2 a twin lnb but there not connected to a switch i only use one cable that is connected directly to the reciever thanks

[nob0dy]

This is the first time i used a bell dish it was here when i moved here. I had this local guy come over and set it up for 110 and 119 and it worked great for a year with a full signal . The lnb is like in picture 2 a twin lnb but there not connected to a switch i only use one cable that is connected directly to the reciever thanks

go to the channel 102 or 101 do they work ? see a guy talking about a receiver & a remote ?

[beefcake]

NOBODY i'm getting nothing now bad or no signal on everything. Seem i had this problem before when i first came here and had to get someone to change the ports , this has been 4 days of hell thanks

[nob0dy]

you need to set up switch settings
91=1
82=2
or
119=1
110=2

NOBODY i'm getting nothing now bad or no signal on everything. Seem i had this problem before when i first came here and had to get someone to change the ports , this has been 4 days of hell thanks

those are the port settings ....

119 port 1
110 port 2
129 port 3

............ unless your talking about your private server .........

[beefcake]

Sorry but i have my diseqc switch ste that way i can't find the ports thanks

[nob0dy]

Sorry but i have my diseqc switch set that way i can't find the ports thanks

4x1 diseqc eg: below



2x1 ::




or is this your setup ?

kinda confused here ..... you have one of these dishes below ......






but then you're saying your using a disecq switch ..........


please look at the top photo in post #8 ..... under each LNB says what it is & what it does ..........

[beefcake]

Thanks i am useing legacy twin and no switch i think i'm gonna have to call someone in to check it i been trying for 4 days now