sat9182 north up/down

[Simon Templar]

2041 is on Sat 91 12282-21500 is gone.

[italian1]

2041 is on Sat 91 12282-21500 is gone.

I thought being HD channel itwas on the 82. Guess I gotta wait. Thanks

[sat9182]

your going to see 82 get phased out its at end of life and there contract is over for it they extended it for couple years i believe but they are going to be moving all to 91

they are making sd mpeg-4 for a reason to save space and bandwidth make some room to move all the hd over to 91

that's why you will see any stations they have in hd and sd the sd will go away so they don't have duplicate channels

the ones they dont have in hd will stay sd just in mpeg-4 format

[NorthernPike]

Hi, I have CTV20 HD on 1209, and working for DL T5

[redrooster1]

your going to see 82 get phased out its at end of life and there contract is over for it they extended it for couple years i believe but they are going to be moving all to 91

they are making sd mpeg-4 for a reason to save space and bandwidth make some room to move all the hd over to 91

that's why you will see any stations they have in hd and sd the sd will go away so they don't have duplicate channels

the ones they dont have in hd will stay sd just in mpeg-4 format

so how do I know my Jynxbox HD v6 is mpg-4 compatible. Sorry but after all these yrs I dont know whats what. I just pay get it going and do not touch anything. I have both 82 and 91 dishes. is there something I need to do or just be patient and wait for the dust to settle. Thanks

[dishuser]

so how do I know my Jynxbox HD v6 is mpg-4 compatible. Sorry but after all these yrs I dont know whats what. I just pay get it going and do not touch anything. I have both 82 and 91 dishes. is there something I need to do or just be patient and wait for the dust to settle. Thanks

https://www.satfix.to/showthread.php...94#post1391194

[RonTheRipper]

jynksbox change transponder 1 to 10 to turbo 8psk and symbol rate to 21500

I made these changes. I now have a signal but no channels coming in after a scan on those transponders. Am I missing something? Thanks.

[italian1]

Hi, I have CTV20 HD on 1209, and working for DL T5

Yea same here, not for long though

[fishmaster]

Hey redrooster1. I believe you said the magic words in your previous post- Please be patient and let the dust settle! That's the best advice I can give you my friend. Anything that BEV does takes time and also testing on their part. Lets just wait and see how this ALL unfolds! I understand your frustration my friend but like the old-saying says- Patience is a virtue. My apologies if I interrupted this thread. Thanks and good luck to us all! Fishmaster.

[RonTheRipper]

I made these changes. I now have a signal but no channels coming in after a scan on those transponders. Am I missing something? Thanks.

Figured it out. Once I made the changes the channels came up. The trick here is not to delete the channels or factory your Jynxbox. Just make the changes, never mind the scan and watch the missing channels. To bad the DL wasn't this easy.

[surfinisfun]

Figured it out. Once I made the changes the channels came up. The trick here is not to delete the channels or factory your Jynxbox. Just make the changes, never mind the scan and watch the missing channels. To bad the DL wasn't this easy.

I call BS , bet you scanned them but cant watch them.

[RonTheRipper]

I call BS , bet you scanned them but cant watch them.

Now why would you say that? Like I said, they wouldnt scan. What I did was I changed the effected transponders to 21.500 and then changed mode to Turbo. Watching Fox news as I type. Quit being an a...ole and try it yourself.
Already confirmed by sat9182 https://www.satfix.to/showthread.php...89#post1391189

[anthonym41]

Wish this worked on dreamlink as well but so far it sounds like it only works on jynx

[dishuser]

Wish this worked on dreamlink as well but so far it sounds like it only works on jynx

make note of that section
https://www.satfix.to/showthread.php...are-alteration