This is the Fourth JB 200 Module failure in Jynxbox.I was just wondering what part fails in the Module.
This is the Fourth JB 200 Module failure in Jynxbox.I was just wondering what part fails in the Module.
from what i found is C52 & C55 an replace them with 33UF 35V an sometime's the 2of the diodes will short out they are D4 & D5 replace them with 1n4007 you will need a pencil tip soldering gun an yes these are really small so if you mess up well that's up to you i play music real loud my self hope this help
Last edited by lungfao; 11-11-2018 at 04:23 PM.
ok all so with a bad JB200 board check this out. on KU BAND it work's great. but not on other sat won't work on HD or MEPG4. all so the power cord to it i think it short's out and send to much power it main board witch then i think short out the JB200. then the power cord won't power up the REC ok then i had a power cord from a router 12V 1A will work on it ok check this out if you test the power cord it will show the right power for some reason ya i no crazy.
♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫
Coming soon to a crop circle near you.....
There is a 66 and third % chance that I'm on the right planet...
"I'm happier then a Jackalope in a balloon factory"
"First rule of testing satellites"
"If its working fine now, then don't mess with it"
"Second rule of testing satellites"
"If you did mess with it, and now it doesn't work, can you blame someone else?"
"Third rule of testing satellites"
"If you did mess with it, and it doesn't work now, and you can't blame someone else"
"Can you HIDE it"?
♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫
Coming soon to a crop circle near you.....
There is a 66 and third % chance that I'm on the right planet...
"I'm happier then a Jackalope in a balloon factory"
"First rule of testing satellites"
"If its working fine now, then don't mess with it"
"Second rule of testing satellites"
"If you did mess with it, and now it doesn't work, can you blame someone else?"
"Third rule of testing satellites"
"If you did mess with it, and it doesn't work now, and you can't blame someone else"
"Can you HIDE it"?
I just quit IKS instead of investing in another JB 200.Overheating was an issue,I had an external fan but wasn't turned on last time so it blew JB 200 again.I switched to IPTV and so far lots less freezing.If I go back to IKS someday,I will get another Receiver altogether.
Thanx for all the helpful posts.
Please send the diagrame with two C52 and C55
I have one of these receiver and it is very important that you keep the JB200 very cool. I bought a box that had no internal fan installed so I had to install a fan and I make sure the fan is running before I turn on the box and so far I am having no issues with the JB200.
Hey I know I’m resurrecting an old thread but does anybody know where I can source a jb200 in Canada? These are hard to come by
There's one for sale on fleabay as I type this
Bought one myself a few years back with a heat sink on it from eBay . Still working well
As one of the I switched to iptv so far less glitching, let's not forget the heavy load on your internet connection, and if there isn't a heavy load (Netflix says 3.5 gb per hour HD, 7- 8 gb per hour of video watched 4k).
With amatuer "iptv " you're getting a cheap quality box to watch a signal that objectively is at best DVD quality and at worst unwatchable. Even if the osd and box seller or even the player's say HD or 4k. They cannot change the streams I monitored and thier sd quality size.
They can't hide the fact that those true HD qualities require a certain amount of bandwidth. Unless you apply "magical thinking " and wish to believe that some guy in his basement with amateur equipment, can do a better job at encoding hd and 4k at 1/4 the bandwidth than Netflix and Amazon Prime tv, even hulu. Who are always looking to reduce bandwidth costs, while maintaining the proper quality for HD and 4k.
Clearly if that was possible that person would be a overnight billionaire, and not making cheapo internet streams
Satellite via Jynxbox:
This takes little to no load on your internet, as most of us know and the picture is what it says it is. And not being sent via the internet there is zero concern of receiving a "notice"
I know this because I do have a "iptv" box just to test. I put on a proper same channel on both boxes , switched via hdmi switcher one to the other , the quality on satellite hd was well 1080 HD. On the other it was watchable looked almost as good as we, but only sometimes, and face smudgieness and occasional blackouts were a factor. I could live with it but only if I "had" to which we do not . Neither should we.
What's my point? The Latin forums have figured out how to permanently fix the jb200 tuners, they've hardware modded 2 tiny pcb on the back of jb200 to send more current down the line, less stress on the caps that fry out, and better switching. It's a hardware mod . I posted pics on this site.
Instead of buying new jb200 and worrying about supply just to get perfect satellite quality and dolby digital sound.
Why don't we (whoever understands espaneol, I don't ) all work together and resolve this once and for all?
There has to be enough fta people that want true satellite hd direct from the source not retransmitted for the 3rd time. Yes?
Then next issue is to get dual tuner and recording on USB working properly . Currently it glitches in recording onto thumb drives . Have not tried USB hard drive. But to record properly we need the dual tuner firmware working.
Has anyone tried the official clone killer firmware? It was supposed to enable dual tuner and cool down the box , make it run cooler.
Last edited by Willucome2014; 06-29-2019 at 09:28 AM.