New t5 today.

**wilfredw** · 11-22-2018, 04:13 AM

Got my factory file in and my server in but won,t scan in bev channels.Got it set on turbo but get nothing.Any ideas.

**fn59** · 11-22-2018, 10:50 AM

Post the settings you're using, and the dish/lnb type you're hooked up to.

**nobodyspecial** · 11-22-2018, 10:06 PM

Originally Posted by fn59

Post the settings you're using, and the dish/lnb type you're hooked up to.

post the system info too
you did load software file?

**beefcake** · 11-22-2018, 11:55 PM

Turbo doesn't have BEV to scan in .

**wilfredw** · 11-23-2018, 12:08 AM

Would you be able to connect to server without software?System Info dream.t5 8psk loader l1.00.00 ht v20 1.00.00 ver 1.06.00

**wilfredw** · 11-23-2018, 12:11 AM

Lnb power on lnb single is what I have freq 5.150 signal and quality in high 90s.

**nobodyspecial** · 11-23-2018, 12:17 AM

Originally Posted by wilfredw

Would you be able to connect to server without software?System Info dream.t5 8psk loader l1.00.00 ht v20 1.00.00 ver 1.06.00

you have latest file loaded
post your hardware and settings

**wilfredw** · 11-23-2018, 12:27 AM

Not sure exactly what your looking for I posted some info earlyer.I was using setup for my jynxbox until it calfed last month.

**nobodyspecial** · 11-23-2018, 12:34 AM

your lnb type ,switches if any, and your settings for 82 and 91
your signal and quality should be in blue

**surfinisfun** · 11-23-2018, 12:44 AM

Originally Posted by wilfredw

Got my factory file in and my server in but won,t scan in bev channels.Got it set on turbo but get nothing.Any ideas.

Tranmision for bev should be DVBS QPSK

**nobodyspecial** · 11-23-2018, 12:51 AM

bell has been turbo 8psk since 2011

**surfinisfun** · 11-23-2018, 12:57 AM

Originally Posted by surfinisfun

Tranmision for bev should be DVBS QPSK

Originally Posted by nobodyspecial

bell has been turbo 8psk since 2011

i think its best to scan under DVBS QPSK

Just a hunch, take it for what its worth. Can't hurt to try.

**nobodyspecial** · 11-23-2018, 01:07 AM

Originally Posted by surfinisfun

i think its best to scan under DVBS QPSK

Just a hunch, take it for what its worth. Can't hurt to try.

good for the sd but why use a 8psk board?
just a hunch you might need it for hd...lol

**wilfredw** · 11-23-2018, 01:12 AM

Originally Posted by nobodyspecial

your lnb type ,switches if any, and your settings for 82 and 91
your signal and quality should be in blue

Nlb freq 12.2-12.7 lo11.25ghz if 950-1450 Box has no nimiq sats sinals are in red

**scooby8888** · 11-23-2018, 01:13 AM

that freq is off it should be 11250 on the lnb with no switch everything should be off we need to know what lnb and switch you are using

Thread: New t5 today.