New t5 today.

[nobodyspecial]

Nlb freq 12.2-12.7 lo11.25ghz if 950-1450 Box has no nimiq sats sinals are in red

you need to do a factory set after loading the software file

[nobodyspecial]

that freq is off it should be 11250 on the lnb

the low on his lnb is 11250

[surfinisfun]

good for the sd but why use a 8psk board?
just a hunch you might need it for hd...lol

Guess that's true, it would only be good for 91

[wilfredw]

that freq is off it should be 11250 on the lnb

OK Changed that.

[wilfredw]

I have my dish solid on 82.

[scooby8888]

do you have 2 lnbs and a switch or a dishpro lnb from bell or ?

[surfinisfun]

Maybe scan 91 DVBS QPSK and 82 TURBO

[wilfredw]

do you have 2 lnbs and a switch or a dishpro lnb from bell or ?

No just one.

[wilfredw]

OK Changed that.

Since I changed to 11.250, I have no signal.

[nobodyspecial]

you stated you have no nimiq sats in your sat list and you wont until you perform a factory set
AFTER that you set up your sats and scan

https://www.satfix.to/showthread.php...HD-Set-Up-Info

[wilfredw]

you need to do a factory set after loading the software file

I did that, should I do over?

[wilfredw]

you stated you have no nimiq sats in your sat list and you wont until you perform a factory set
AFTER that you set up your sats and scan

https://www.satfix.to/showthread.php...HD-Set-Up-Info

Did another fac reset and there are ni iqs thanx channels are scanning

[scooby8888]

then i'm assuming you have a dishpro quad look up a pic and if it is you have to set the lnb type to ocs dp then lnb freq to 11.250 on the 91 you have to set the diseqc sw1.0 to 1 then when you do the setting for the 82 its the same ocs dp then lnb to 11.250 but the diseqc 1.0 has to be changed to 2
..

.

[wilfredw]

Thanx nobody surfin scooby I,m watching tv.One thing though volume buttons don,t want to work.

[scooby8888]

try the buttons around the ok button if its the same remote i have