Originally Posted by
foresight
I have checked two sources and can't see either 1522 or 1660. Maybe I'm missing something and could be wrong. At any rate all 32 tp's on 82 should be...SR 21500 and FEC 2/3 for the exception of one on the FEC. Maybe post up which tp you are referring to with 1522 and someone maybe able to help a bit more. As to LNB settings if you have a dp with the built in switch you should use OCS-DP. Using another setting other than matches your LNB type could cause an abnormal scan. Like switching polarity could cause scanning problems as well. 12530 if memory serves me is the only one with an FEC of 3/4(A). All the above is in regard to 82.
91 has the same 32 tp Freqs. as 82 basically but 91 uses SR 20000 and the FEC varies per tp as listed per lyngsat.
There was or is a way to convert all tp's to vertical to be used with a dp but been so long and your talking bev so not sure if there would be any benefit.
Imo an individual tp scan works better and less chance of missing some. But that is a personal preference. Not familiar with the T5 but most of the Freqs., SR, polarity and FEC etc. are the same for all stb's basically.
**Edit...Forgot also there is one on 82 Freq. 12443 that still uses a SR 20000 and FEC of 7/8. Sorry I'm tired and getting rusty.**