I have posted in past about Switches, but this confounds the mind.
I am using a standard satellite dish with a Chieta DiSEqC Switch.
I used a barrel connector between sat 91 then sat 110 both worked when connected to connector separately.
I connected sat 110 to port 2 of the switch and sat 91 to port 3.
After I did a scan on sat 110 I was receiving both sat 110 and 91, but after awhile I lost sat 110.
It showed up as bad signal and all ports on dish settings showed up as sat 91,
I do have one barrel connection on Dreamlink HD with sat 91 which works perfectly.
The other Dreamlink HD T5 has the DiSEqC Switch connected to it with the 91 and 110.
A few years ago I used to be able to connect 110 and 91 with one dish to one box, but this has changed.
I cannot figure this out. Maybe I need to use a different DiSEqC Switch instead?
On Dish Settings I have LNB Power On.....LNB Type Single....LNB Frequency 11.250....LNB 22kHz On.
The Quality and Signal is blue bars from the low to mid 90s for 91.
I received the same Quality and Signal for bot 91 and 110 but leaving it on a 91 longer is when I lost 110.
Could anyone else please let me know what can be done about this.
Thanks in advance.