I’m missing CNN,HLN,CTV NEWS NET, HGTV, DIY,,,and CBC news net is stuttering,
Anyone know when this will fixed.?
I’m missing CNN,HLN,CTV NEWS NET, HGTV, DIY,,,and CBC news net is stuttering,
Anyone know when this will fixed.?
I'm using OK3, and all the above channels are perfectly fine right now. CBC news I tried for like 2 minutes and no glitch, it is solid.
Problem is probably on your end. Don't know what box you are using, but time for a hard reboot (many boxes just go to sleep - which over time it is an issue), clear cache.. And worst case, you may need to go to apps, and Clear Data on the app you are using (buzztv, stbemu, etc..).
Actually, all channels are working (definitely not missing)..
But I'll give you the CBC news issue.. It was fine for about 5 minutes, but I did start to glitch a little.. And once it actually froze.. I changed channel, came back and it is fine now.. I was running the tests on my old box running stb emu, so I'm not saying it can't be my box. I did not check on my buzz.
I guess to clarify, the channels are there, I can hear them, bit there’s no picture
I just did a hard reboot with no change, I’m using a Mag 253 box
Tammy
Are you using ok2 or ok3 ?
I have never heard of a MAG253.. Sure it's not a 254 ?
Did it work before ? Wondering if it is a potential codec issue, due to the age of the box.
As far as I know ok3 is using h264.. Unless they have started moving stuff to h265 codec. Only herkimerjerkimer can confirm, but I'd be surprised if they did not advise us beforehand. If they have started to move channels over to h265, then older boxes will not be able to decode the video signal.
Anyhow, this is surely not an ok2/ok3 server issue. You should probably start a new thread, and leave this thread for actual potential server issues.
They are prolly H265 channels which the mag254 box cannot decode. I have a friend using a mag254 on OK2 and he lost a lot of channels.
You have to buy new box or try different server.
they are running the H265 stream if running a Mag box you nee a Mag 322 ore higher to pick up the channels
PLEASE Do NOT PM me for support! Post ALL Support questions in the forums for all members to benefit.
Hopefully not off topic but to help the OP, what service can a mag254 use that is comparable without channel loss?
You need a MAG 256 or better to receive OK2. That is why I went to a Buzz xpl3000.