so I have a dilemma with my Jynxbox ultra lite Hd. Usually when I watch sat 91 and 82 I have a signal strength of 80
Since yesterday, sat 91 still has signal at 80 but when I switch to Hd sat 82, the signal goes down to 58-60 and then not long after I have no signal and if I go back to sat 91(Sd), I have no signal no more.
I changed the jb200 without any change. It still does the same thing everytime.
all this was fine before yesterday
anybody have a clue on what the problem could be? Jinxbox fried? Lnb , switch ?
here are the settings for both sat
dish settings sat82 (no signal)
lnb freq 11250
diseqc1.0 Port 1
diseqc 1.1 Disable
Legacy Sw off
legacy Lnb off
22k On
polarity auto
dish settings sat 91 (works)
lnb freq 11250
diseqc1.0 Port 1
diseqc 1.1 Disable
Legacy Sw off
legacy Lnb off
22k off
polarity auto
thanks in advance
Happy Holidays to all