Switching 9182

[The Noof]

Are you saying I need 2 cables running for the dish , I only had 1 for both 91 and 82 on my sub.

No sir....did you read my post above????.It seems to me you have no idea of the lnb type you have:there are several choices,depending on how old your installation is.It sounds like you have a DP44.If so, your settings MUST reflect that.

[wilfredw]

I can see a 2 to 1 switch from the ground,that's all I can give you.To much snow and ice on roof. There are 2 individual lnb,s .About 20 years old.

[wilfredw]

Suddenly 82 works and 91 is gone and I didn,t change anything.91 quit so I punched in 2400 and tsn came right up.This is to weird.

[The Noof]

I can see a 2 to 1 switch from the ground,that's all I can give you.To much snow and ice on roof. There are 2 individual lnb,s .

If you see an external switch,2 in/1 out, it must be legacy lnbs & an sw21.Try making your settings to 91 nimiq 1/lnb power on/lnb type single/lnb frequency 11250/lnb 22k on/diseqc off/diseqc off/ legacy sw21 dish 1

Then for the 82:82 nimiq 4/lnb power on/lnb type single/lnb frequency 11250/22k on/diseqc off/diseqc off/legacy sw21 dish 2.


Scan each on its own.

[nobodyspecial]

Until your settings are correct either and could work

[wilfredw]

If you see an external switch,2 in/1 out, it must be legacy lnbs & an sw21.Try making your settings to 91 nimiq 1/lnb power on/lnb type single/lnb frequency 11250/lnb 22k on/diseqc off/diseqc off/ legacy sw21 dish 1

Then for the 82:82 nimiq 4/lnb power on/lnb type single/lnb frequency 11250/22k on/diseqc off/diseqc off/legacy sw21 dish 2.


Scan each on its own.

Seems to be OK , took a bit to come alive on 91 but it's up too now.Thanks a million,hope it stays good.