My XR 4000 about every 3 or 4 times when I turn it on with the remote will show No Signal. I have to unplug and replug to get it to start. Any ideas?
My XR 4000 about every 3 or 4 times when I turn it on with the remote will show No Signal. I have to unplug and replug to get it to start. Any ideas?
try another hdmi
Possible power supply problems??? Is the power supply an external one? (what is sometimes called a ""Wall Wart"") See if it is hot or unusually warm to the touch, if so then try a new one with the same voltage, current rating (current rating can be higher then the old one) and correct power plug to the receiver.(there are several types)
You can always use one with a higher DC current rating, but not one with a lower or higher DC voltage rating.
How old is the unit in question?
♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫
Coming soon to a crop circle near you.....
There is a 66 and third % chance that I'm on the right planet...
"I'm happier then a Jackalope in a balloon factory"
"First rule of testing satellites"
"If its working fine now, then don't mess with it"
"Second rule of testing satellites"
"If you did mess with it, and now it doesn't work, can you blame someone else?"
"Third rule of testing satellites"
"If you did mess with it, and it doesn't work now, and you can't blame someone else"
"Can you HIDE it"?
I am first trying NBS's recommendation and will see how it goes for a few times on and off. Thanks to both of you.
Issue is the hdmi, or try a different port on the TV set
Peace & Love
I am trying both, a different HDMI and different port, so I'll give it a few times and report back.