Results 1 to 10 of 10

Thread: Septic tank experts

  1. #1
    Join Date
    Oct 2009
    Posts
    8,688
    Satfix Buxs
    2,437,536
    Thanks
    3,306
    Thanked 7,953x in 3,008 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default Septic tank experts

    OK, this is a stinky one.

    I have what is called an engineered septic system, the tank has a pump in it that is controlled by floats, waist water gets too high (on the output side) an it starts pumping, waist water gets to low level it shuts down.

    Last night I heard the pump controller kick on, (control unit is attached to the side of the house) I did not hear it shut off, (went to bed) I wondered about this afternoon and went to check, the unit did not shut the pump off, it ran all night.

    I shut it down and opened the pump side of the tank, I found that the lower float was stuck for some reason, gave it a good squirt with the garden hose and it's freed up. (for now)

    My question to you pump guys, is the pump damaged in any way due to it running out of stuff to pump????

    It looks to work ok with the controller in manual mode, I wonder if the pump has a thermal overload, and it just shuts down when it gets too hot.

  2. The Following User Says Thank You to Terryl For This Useful Post:


  3. #2
    Join Date
    Sep 2012
    Location
    35.2532 N, 82.1971 W
    Posts
    3,031
    Satfix Buxs
    1,257,327
    Thanks
    18,831
    Thanked 11,734x in 2,601 Posts
    Items beerWhiskeyA BeerSprint carFootballYing & yangTreeDoll

    Default

    Pump should be ok unless there was a strain on motor.But that wasn't the case.

  4. The Following 4 Users Say Thank You to runamok For This Useful Post:


  5. #3
    Join Date
    Apr 2017
    Posts
    628
    Satfix Buxs
    1,376,719
    Thanks
    4,379
    Thanked 1,621x in 417 Posts

    Default

    As long as there is some kind of fluid to keep the bearings lube you are OK. I have the same set up at the lake cabin and this happened to me for 2 days a couple of years ago and everything was fine after restart.

  6. The Following 2 Users Say Thank You to staticrider For This Useful Post:


  7. #4
    Join Date
    Oct 2009
    Posts
    8,688
    Satfix Buxs
    2,437,536
    Thanks
    3,306
    Thanked 7,953x in 3,008 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default

    Thanks Runamok and Statrider, I was worried as the local septic company want's $500 just to look at it, I think they have to pump the tank first.

  8. The Following User Says Thank You to Terryl For This Useful Post:


  9. #5
    Join Date
    Sep 2012
    Posts
    5,586
    Satfix Buxs
    1,561,482
    Thanks
    32,494
    Thanked 32,002x in 5,164 Posts
    Items HookahA BeerFootballGolfACDCGuitar2street BikeCheckered Flag

    Default

    Usually there is a ceramic shaft seal that separates the impeller from the internal bearings similar to a pool motor. The internal overload protector usually comes into play with a locked rotor. I would be more concerned about the ceramic seal exposing the internal shaft bearings to water............

  10. The Following 3 Users Say Thank You to steveOtoo For This Useful Post:


  11. #6
    Join Date
    Dec 2015
    Posts
    5,052
    Satfix Buxs
    1,429,714
    Thanks
    17,616
    Thanked 20,904x in 4,480 Posts
    Items helicopter
Gift received at 12-23-2019, 06:22 PM from orchidgirlJeep
Gift received at 12-23-2019, 06:22 PM from orchidgirlCrown Royal
Gift received at 12-23-2019, 06:22 PM from orchidgirlSome beer
Gift received at 12-23-2019, 06:22 PM from orchidgirltreasure chest
Gift received at 12-23-2019, 05:52 PM from orchidgirl
Message: jejejeImmunity to Theft

    Default

    Please don't bite your finger nails.

  12. The Following 3 Users Say Thank You to The Noof For This Useful Post:


  13. #7
    Putski's Avatar
    Putski is offline Visiting Dignitary/ 2019 nfl week 16 champ
    Join Date
    Mar 2015
    Posts
    1,102
    Satfix Buxs
    1,671,544
    Thanks
    9,023
    Thanked 3,253x in 799 Posts
    Items Some beerHookahA BeerImmunity to Theft

    Default

    Curious if all is working good for you?

  14. The Following User Says Thank You to Putski For This Useful Post:


  15. #8
    Join Date
    Oct 2009
    Posts
    8,688
    Satfix Buxs
    2,437,536
    Thanks
    3,306
    Thanked 7,953x in 3,008 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default

    All working for now, I ran both showers and waited till the pump kicked in, then waited till it shut off, all's working good.

    Thanks Guy's.
    ♫♫♫ Im a lumberjack and Im OK ♫♫♫ I drink all night and sleep all day. ♫♫♫



    Coming soon to a crop circle near you.....

    There is a 66 and third % chance that I'm on the right planet...

    "I'm happier then a Jackalope in a balloon factory"

    "First rule of testing satellites"
    "If its working fine now, then don't mess with it"

    "Second rule of testing satellites"
    "If you did mess with it, and now it doesn't work, can you blame someone else?"

    "Third rule of testing satellites"
    "If you did mess with it, and it doesn't work now, and you can't blame someone else"
    "Can you HIDE it"?

  16. The Following 5 Users Say Thank You to Terryl For This Useful Post:


  17. #9
    Join Date
    Mar 2019
    Posts
    151
    Satfix Buxs
    318
    Thanks
    71
    Thanked 118x in 60 Posts

    Default

    waist water gets too high
    waist high or waste lmao

  18. #10
    Join Date
    Oct 2012
    Posts
    389
    Satfix Buxs
    7,199
    Thanks
    846
    Thanked 332x in 193 Posts

    Default

    I would not do anything with the pump unless it fails ... You should clean and do what you can to insure the cutoff and cut on float switches are floating freely and working ....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •