wil not boot up?

[dinger]

ok, pulled the HD module and box would boot up!! So I then put new factory file and the latest file. Then remembered I had a new HD module so put that in!! Now it all seems to work except for trying to connect to server as that is a bitch cause you can't see if it saved or not?? Hope i'am using correct info?? Waiting on sat9182 for that?? Anyhow seems to be good now, thanks everyone for your help!!!

[dinger]

Try & get one with a little more jump to it 3.5-5amp if you can

yea will do when this one craps out!! thanks...

[auggie]

Your HD Module has to be positioned correctly, there is a white arrow on the Module that has to point to the back of the T5
When "Seated Firmly", Also I wouldn't wait for the power adapter (yea will do when this one craps out!! thanks...) to replace it
with one that has more power, it will fail, it is the #1. issue/problem with the Dreamlink T4-5's

[dinger]

Your HD Module has to be positioned correctly, there is a white arrow on the Module that has to point to the back of the T5
When "Seated Firmly", Also I wouldn't wait for the power adapter (yea will do when this one craps out!! thanks...) to replace it
with one that has more power, it will fail, it is the #1. issue/problem with the Dreamlink T4-5's

yea your right will look and order one....thanks for your help!! much appreciated!! would you happen to have a link for one??

[auggie]

Here's one: hxxps://www.amazon.ca/COOLM-Adapter-100-240V-Doorbell-5-5X2-5MM/dp/B07H2T31JJ/ref=sr_1_7?crid=14XGFIW1SCQ93&keywords=12v+4a+powe r+supply&qid=1655592422&sprefix=12v+4%2Caps%2C205& sr=8-7

[auggie]

When you get your info from SAT9182 do this in T5 server setup

Fill in each line one by one top to bottom (no mistakes) when ALL INFO is in, then push exit button, a Box will open asking you to save it, select !!YES!! You should be GO-TOO-GO from there, (make sure IT IS SET TO DHCP & not Static)
Also you may have to Re-Boot "EVERYTHING" (MODEM/ROUTER, & T5) so that the T5 will get assigned a IP address from modem/router.

[dinger]

When you get your info from SAT9182 do this in T5 server setup

Fill in each line one by one top to bottom (no mistakes) when ALL INFO is in, then push exit button, a Box will open asking you to save it, select !!YES!! You should be GO-TOO-GO from there, (make sure IT IS SET TO DHCP & not Static)
Also you may have to Re-Boot "EVERYTHING" (MODEM/ROUTER, & T5) so that the T5 will get assigned a IP address from modem/router.

thanks, will do!!

[dinger]

When you get your info from SAT9182 do this in T5 server setup

Fill in each line one by one top to bottom (no mistakes) when ALL INFO is in, then push exit button, a Box will open asking you to save it, select !!YES!! You should be GO-TOO-GO from there, (make sure IT IS SET TO DHCP & not Static)
Also you may have to Re-Boot "EVERYTHING" (MODEM/ROUTER, & T5) so that the T5 will get assigned a IP address from modem/router.

cannot enter all the lines without exiting when dialogue box comes up?? Says connection is good but will not connect to server after trying many times!! Tried different server lines did not help? Not sure what to try next?? thanks...

[scooby8888]

not sure if you know but when you input the port you don't hit the red/enter button just move down to the next line and then you can hit the red/enter on the rest.

[dinger]

not sure if you know but when you input the port you don't hit the red/enter button just move down to the next line and then you can hit the red/enter on the rest.

yep, that's what I do?....

[auggie]

You don't need to hit the red/enter at all if you don't want, just fill in all the fields one by one top to bottom
then hit/push the exit button on remote, a pop-up should open asking you to save, "YES" with OK button on remote

[jets]

Dinger if you are in Canada you can get good PS at Princess Auto SKU: 9012865. The first thing I do with any Dreamlink is through out the factory PS, the PA one I know it works

[dinger]

You don't need to hit the red/enter at all if you don't want, just fill in all the fields one by one top to bottom
then hit/push the exit button on remote, a pop-up should open asking you to save, "YES" with OK button on remote

thanks, will keep trying!!

[foresight]

An option if one wants. A way to take the guess work out of correct info if it works as intended. Your call.

stuff.jpg

[auggie]

I have since talked (PM) to Dinger he has it Up/Running it was Human error, inputting Wrong Credentials
Us old Farts need to "SEE" what we are inputting/doing so that there isn't any MISTAKES & have to start over lol lol

That's one reason why I like my SV8000HD