Missing Cannels

[bad1]

I am using iks 8192
I seemed to have lost 1774 and 1781
Am I doing something wrong

[dishuser]

according to lyngsat no such channel numbers even exist

[dishuser]

are you sure it isn't 774 and 781?

[maird57]

are you sure it isn't 774 and 781?

I believe the T5 adds the 1

[dishuser]

I believe the T5 adds the 1

then they should turn renumbering off and only use bev and leave dish off

[auggie]

then they should turn renumbering off and only use bev and leave dish off

if you turn renumbering off for bev etc. it screws up the channel order reverts to dish number channels
even if you are not hooked up to Dish. when these FTA boxes came out they were setup for Dish, Bev wasn't
even in the picture, bev came after that's why the renumbering.

[dishuser]

if you turn renumbering off for bev etc. it screws up the channel order reverts to dish number channels
even if you are not hooked up to Dish. when these FTA boxes came out they were setup for Dish, Bev wasn't
even in the picture, bev came after that's why the renumbering.

I have the dlhd,t4 and t5 and if you turn on bev only you get the correct sid
been like that for over a decade

[auggie]

i don't know what to tell you but on mine it screws up the channel #'s order if I turn on bev only
on my T5 channel 200 is Global channel 1200 is CBC ?

On the sonicview8000hd it adds the # 2 so channel 200 is 2200 on the sonicview.

[squirtNcider]

I just checked and both channels (1774 and 1781) are up and running fine.....

[dishuser]

i don't know what to tell you but on mine it screws up the channel #'s order if I turn on bev only
on my T5 channel 200 is Global channel 1200 is CBC ?

On the sonicview8000hd it adds the # 2 so channel 200 is 2200 on the sonicview.

on the elite 200 is 200

[auggie]

on the elite 200 is 200

Could that be due to the elite not being HD (no 82 sat.) ?

[dishuser]

Could that be due to the elite not being HD (no 82 sat.) ?

nope
because when I used it 82 wasn't all hd
I used it for 82,91,110 and 119
turn either dish or bev off and no issues with correct sid

[nobodyspecial]

Been a long time but I remember having to hit sat button and selecting bev package?

[dishuser]

Been a long time but I remember having to hit sat button and selecting bev package?

exactly
worx on dl,sv,vs and cnx