Junxbox Premium HD Info/Pictures/"Review"

[lomchivok]

Look like AliExpress no longer has the Junxbox Premium HD Receiver for sale. Another place to order is from Made in China and the cost is US$88.50, which include shipping. Email address is tonyzhesell <[email protected]> for contact.

Yes, tonyzhesell is the person I got the email from who provided the aliexpress link where I ordered the Junxbox. Tracking says it's cleared customs and has left china on it's way here.

[lomchivok]

Well, it came yesterday. Pretty well packaged. Setup was easy and it's working. One thing I don't like is the functionality of the remote but I do have a Jynxbox V3 that the Ethernet port stopped working and tried the Jynxbox remote on the Junxbox and it works great. More functionality as in the previous channel recall actually works now and navigation of the remote is much easier. Satisfied so far.

[RonTheRipper]

I am unable to get this box to connect via ethernet port. Ive unplugged modem, router and box but it's still not showing the proper ip address. With wifi stick there are no issues connecting but when I unplug the wifi stick and reboot my network, it still shows the wifi ip. Frustrating. Maybe a bad ethernet port?

[squirtNcider]

Read post #69. I have same issue with the ethernet but haven't tried that suggestion yet as my T5 still works on 82 but hopefully it does work.

[lomchivok]

I am unable to get this box to connect via ethernet port. Ive unplugged modem, router and box but it's still not showing the proper ip address. With wifi stick there are no issues connecting but when I unplug the wifi stick and reboot my network, it still shows the wifi ip. Frustrating. Maybe a bad ethernet port?

I had that issue too. I had a T5 that I copied the IP info from, changed the junxbox from DHCP to static IP and put that info into the Junxbox. After that no connection issues.

[fishmaster]

Is there a decimal-point or period on the remote? I could not fine it.

[RonTheRipper]

Read post #69. I have same issue with the ethernet but haven't tried that suggestion yet as my T5 still works on 82 but hopefully it does work.

thx
Ya I tried that and it did not work

[RonTheRipper]

I had that issue too. I had a T5 that I copied the IP info from, changed the junxbox from DHCP to static IP and put that info into the Junxbox. After that no connection issues.

Thankyou. But what happens when you use the box at another location? I would have to carry the T5 with me? Was going to ship a programmed box to my brother but I'm thinking this just won't work.

[packrat]

I took mine to the cottage good signal and quality but would not hook up to a different internet

[packrat]

My junxbox is acting strange today. When I turned it on no signal went ito satelite settings and nimiq 1 says (30/62) 91.0w
Transponder says (22/29) no signal. Scanned it brought up all the guide but no picture. Went to guide and it just showed stations but no guide .I could go up down channels some come in on nimiq1 some on nimiq4 I have a single lnb..
Turned it back into satelite config on nimiq1 and have full signa, now with transponderlisting (9/29) 12355h 21500 ..
Dont know if Bev is changing things.

[packrat]

Found out bev is messing with sats everything to return

[The Noof]

I got 1 from Tony as well, for future use.They are what you pay for & are not even close to the Dreamlinks/Sonicviews we got here with.The ethernet port is DOA on my unit (no status lights).The wireless works ok so far, but the unit is directly under my wireless router, so it should.
Setup is ok.When the time comes I will factory reset it & set it up for just the 91 sat.Not watching it for now anyways.
The picture quality is fair at best.HD is far from that of the Dreamlinks, & the HDMI has no audio output on this unit.I have to use RCA cables, but that will be fine for the living room, but not the home theater.It is what it is folks.
Anyone thinking ahead can get spare JB200 models at Amazon as we speak.I ordered 2 yesterday & they will be here middle of next week.
Pray that the software becomes open source for the Dreamlinks...lol.

[auggie]

I got 1 from Tony as well, for future use.They are what you pay for & are not even close to the Dreamlinks/Sonicviews we got here with.The ethernet port is DOA on my unit (no status lights).The wireless works ok so far, but the unit is directly under my wireless router, so it should.
Setup is ok.When the time comes I will factory reset it & set it up for just the 91 sat.Not watching it for now anyways.
The picture quality is fair at best.HD is far from that of the Dreamlinks, & the HDMI has no audio output on this unit.I have to use RCA cables, but that will be fine for the living room, but not the home theater.It is what it is folks.
Anyone thinking ahead can get spare JB200 models at Amazon as we speak.I ordered 2 yesterday & they will be here middle of next week.
Pray that the software becomes open source for the Dreamlinks...lol.

The Dreamlinks are S.O.L. for New Firmware/Software Updates as far as I'm concerned, No one willing to take it on
Now that most have moved to IPTV etc.

[michaelh]

The Dreamlinks are S.O.L. for New Firmware/Software Updates as far as I'm concerned, No one willing to take it on
Now that most have moved to IPTV etc.

junxbox when scanning cant find CNN and Detour as well as playboy and adult channels. why?

[auggie]

Welcome to Bev & their changes that are on-going, I don't have a Junxbox so can't help you much on that
Other than the Junxbox is not a Jynxbox so not the same.