Lost signal and quality

[redrooster1]

Anyone have an idea how all of the sudden i lost my signal intensity reads 22% and signal quality reads 10%. Ive never in all these yrs ever have this happen. I cant imagine 2 LNB' s go bad at the same time. Thanks

[auggie]

Yes it can happen, check to see if Dish moved, bad cabling, connections, bad switch, Ice/snow on LNB
Have to track it down on what's causing it.

[The Noof]

Yes it can happen, check to see if Dish moved, bad cabling, connections, bad switch, Ice/snow on LNB
Have to track it down on what's causing it.

Don't forget the 8psk module too.

[auggie]

Don't forget the 8psk module too.

Yes Noof, those 8psk modules in those Receivers Seem to be a "Common Problem" of over Heating etc.

That's why it is very important to have supplemental Cooling Measures (fans) in place on "ANY" receiver a person is using.

[hotplay]

Mine did the same thing lost signal , the problem was the HD module.

[redrooster1]

Yes Noof, those 8psk modules in those Receivers Seem to be a "Common Problem" of over Heating etc.

That's why it is very important to have supplemental Cooling Measures (fans) in place on "ANY" receiver a person is using.

so are you saying my unit might be cooked then?

[auggie]

so are you saying my unit might be cooked then?

No maybe not, but you may need one of these: hxxps://www.ebay.com/itm/325817114014?_skw=JB+200+module&itmmeta=01JKKRJ3G9 397B1VE66WPE78XQ&hash=item4bdc369d9e:g:9WAAAOSwUal cD8lV&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJ Kn7QHqbv4OR%2BhkOJeeaCLNmLLE6pwK2di4EBi51qaUZD8dnN Dkyi8njdYjbpDWtpwtscrVgPeF1NL%2BV99gXpoP3HM2huUFh4 DY%2FGDPY5cOXKiw%2B2eNQuwMFTv5YcfTBJl3J8JmTEYEMqZy %2FFTmoI4CW4YIT19ppV%2BFwfD3%2BmbA9KxiEQV%2FkPSa%2 BG1CgxQ2qqeWc%2BF4P90U6UbUXfFP%2BvfapCPbUBp6ZXwA1N YQIcurDVll59Q5trdWL%2FbY62766hcg%3D%7Ctkp%3ABk9SR6 a4yPicZQ

They are a common Problem (Heat issues)

[redrooster1]

No maybe not, but you may need one of these: hxxps://www.ebay.com/itm/325817114014?_skw=JB+200+module&itmmeta=01JKKRJ3G9 397B1VE66WPE78XQ&hash=item4bdc369d9e:g:9WAAAOSwUal cD8lV&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJ Kn7QHqbv4OR%2BhkOJeeaCLNmLLE6pwK2di4EBi51qaUZD8dnN Dkyi8njdYjbpDWtpwtscrVgPeF1NL%2BV99gXpoP3HM2huUFh4 DY%2FGDPY5cOXKiw%2B2eNQuwMFTv5YcfTBJl3J8JmTEYEMqZy %2FFTmoI4CW4YIT19ppV%2BFwfD3%2BmbA9KxiEQV%2FkPSa%2 BG1CgxQ2qqeWc%2BF4P90U6UbUXfFP%2BvfapCPbUBp6ZXwA1N YQIcurDVll59Q5trdWL%2FbY62766hcg%3D%7Ctkp%3ABk9SR6 a4yPicZQ

They are a common Problem (Heat issues)

darn could not find that part in search.

[dishuser]

darn could not find that part in search.

that link took me to this
Screenshot 2025-02-10 at 17-43-20 JB200 Module QPSK Turbo 8PSK tuner For DVB-S2 satellite TV rec.jpg

[auggie]

darn could not find that part in search.

Go to Ebay and search for JB200 Module, or just do a Google search for the same, I also believe
it is available on Amazon as well.

[dishuser]

https://www.ebay.com/itm/325817114014?_skw=JB+200+module&itmmeta=01JKKRJ3G9%20397B1VE66WPE78XQ&hash=item4bdc369d9e:g:9WAAAOSwUal%20cD8lV&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJ%20Kn7QHqbv4OR%2BhkOJeeaCLNmLLE6pwK2di4EBi51qaUZD8dnN%20Dkyi8njdYjbpDWtpwtscrVgPeF1NL%2BV99gXpoP3HM2huUFh4%20DY%2FGDPY5cOXKiw%2B2eNQuwMFTv5YcfTBJl3J8JmTEYEMqZy%20%2FFTmoI4CW4YIT19ppV%2BFwfD3%2BmbA9KxiEQV%2FkPSa%2%20BG1CgxQ2qqeWc%2BF4P90U6UbUXfFP%2BvfapCPbUBp6ZXwA1N%20YQIcurDVll59Q5trdWL%2FbY62766hcg%3D%7Ctkp%3ABk9SR6%20a4yPicZQ

[auggie]

I just checked on Amazon Canada, it is available there for $30 plus possible Duties etc.

[intelpenny4]

if i remember correctly there is a way to bring back the HD modules. i think it has to do with the the caps and i cant remember which ones on the board that short out

[The Noof]

if i remember correctly there is a way to bring back the HD modules. i think it has to do with the the caps and i cant remember which ones on the board that short out

All the hardware on a JB200 is surface mounted, not conventional components.They are micro & require hot air stations,ect to perform component replace ment.That is beyond the scope of your average user.

[auggie]

All the hardware on a JB200 is surface mounted, not conventional components.They are micro & require hot air stations,ect to perform component replace ment.That is beyond the scope of your average user.

Cheaper to just replace it, and spend the extra $$ on Cooling Measures (Fans etc.) to keep the unit cool in the first place.

I have said/posted anyone using "ANY" FTA receiver should have cooling measures in place.