Results 1 to 7 of 7

Thread: Goshen Lift System ( How to ) with pics.

  1. #1
    Bigpineguy Retired Guest

    Default Goshen Lift System ( How to ) with pics.

    I am going to now attempt to write the "how to" on changing the aircraft cable and greasing the lift springs for the Goshen Lift System....this was done on my 95/96 Duthmen ( The Duck ) 801.........Here we go ..

    I am going to cheat a little from the instructions that came with the cable ..

    1. Remove the tie plate by removing the 2 self tapping screws


    there are a total of 4 screws , remove the other 2 that connect to the master tube


    then remove the bolts holding the lift tubes at each corner:


    Pull the spring out of the corner by bending it down and pull it out:


    Once you have all bolts/screws removed, slowly pull the springs out of the master tube..


    My cable had snapped up by the Winch, I was able to simply pull the old cable out , When you remove the old cable, if possible, lay it beside the new, to make sure that you have the same distance between the push plates ( important )

    Now, looking at your New cable you will see that 1 end has a Crimped end and the other does not


  2. #2
    Bigpineguy Retired Guest

    Default

    Feed the end without the "crimping" through the bottom of the pulley towards the top of the master tube


    slowly feed it all the way through the top portion of the master tube until it comes out the front...
    Now, take the other end of the cable and pusher plate , and just feed it into the bottom portion of the master tubing and feed it in as far as you can..



    Now! Lets go ahead and grease the Springs before putting it back together....I got a tub of Multi-purpose grease from the local hardware store

    Remove the springs from the lift tubes...they should slide right out



    I dipped the end right into the Grease :


    Then insert the end back into the lift tube:


    I used an old Rag to apply grease :

  3. #3
    Bigpineguy Retired Guest

    Default

    I coated small sections at a time and would slide the greased spring back into the lift

    Repeat the process for the springs that go into the master tube :



    push the lift springs all the way back into place and screw/bolt everything back up :


    Install the new cable on your Winch.......and....

    Crank it up , and GO CAMPING~

  4. #4
    Join Date
    Mar 2018
    Posts
    2
    Satfix Buxs
    15
    Thanks
    0
    Thanked 0x in 0 Posts

    Default

    I was so very excited to see this tutorial! Does anyone know why the pictures are not able to be seen??? This thread is only useful with those pictures. �� Is Bigpineguy Retired still avail and can possibly message me or email me??? Please ��������������

  5. #5
    Join Date
    Mar 2018
    Posts
    2
    Satfix Buxs
    15
    Thanks
    0
    Thanked 0x in 0 Posts

    Default Why no pictures? Help!

    I was so very excited to see this tutorial! Does anyone know why the pictures are not able to be seen??? This thread is only useful with those pictures. 😢 Is Bigpineguy Retired still avail and can possibly message me or email me??? Please 😊🙏🏼🙏🏼🙏🏼

  6. #6
    Join Date
    Sep 2012
    Posts
    16,241
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,704
    Thanked 27,830x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    Quote Originally Posted by tomnlaura View Post
    I was so very excited to see this tutorial! Does anyone know why the pictures are not able to be seen??? This thread is only useful with those pictures. �� Is Bigpineguy Retired still avail and can possibly message me or email me??? Please ��������������
    it tells you why the pictures can't be seen

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  7. #7
    Join Date
    Aug 2014
    Posts
    1,472
    Satfix Buxs
    4,879
    Thanks
    2
    Thanked 4,954x in 1,404 Posts

    Default

    photobucket strikes again ! no wonder they sux

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •