How to FIX your Units if no video or stuck on boot

[fta4me]

did everything to a t getting ErA5

erase means

it's erasing the flash

let it wait 10 min

it will finish

and done

[samson]

after finish. reboot it says again. what now

[fta4me]

after finish. reboot it says again. what now

Remove ls400 and try please and report back

[samson]

same thing tried renamed all bins all doing same

[jeldf]

once it says finished......you removed the USB? and rebooted. Post step by step as to what you are doing.

[samson]

Remove ls400 renamed all bins tried each bin new usb after finish display says ?a in

[fta4me]

it says main

MAIN

main = main screen on menu , your unit is just fine.. check your tv output settings

main = so it booted fine no more reboot

try hdmi out
or rca out

[samson]

Thanx up and going wow

[benfica]

Glad to hear that !
Enjoy the great toy !!

[gheagy]

I had trouble doing this process. I had formatted a USB stick in FAT32, placed the appropriate file on it and during the installation got an "Er 1" display. I changed to a USB stick that was already formatted and the process worked as described.
Why does the display alternate between small cap and large cap letters?
Thanks

[zippy905]

ok.. so i am having these same issues, so i took out the ls400 and it booted to main. does this mean the ls400 is defected becouse as soon as i put it back in it does the stupid reboot problem again (this is a brand new unit just popped it out of the box)

[fta4me]

ok.. so i am having these same issues, so i took out the ls400 and it booted to main. does this mean the ls400 is defected becouse as soon as i put it back in it does the stupid reboot problem again (this is a brand new unit just popped it out of the box)

make sure that you put in the ls400 properly - make sure the pins are not shorting

[zippy905]

I went picked up a new ls400. And it works but funny thing is the old ls works in my limesat from many moons ago

[iceicebaby]

Use new usb
Re download the files
Rename it to factory.udf as instrctions say
Make sure its in root folder

I'm having the boot problem. Have followed instructions no go, it's stuck on Er 1. How do you make sure file is in root folder? I'm hoping that's where I'm doing something wrong.

[iceicebaby]

Thank you fta4me instructions worked as described and were a great help. After 20 tries my friends box finally loaded. What worked for me is I formatted the flash drive and renamed file to pinwheelhdfactory_fw. For some reason it would not load renaming a file to pinwheelhdfactory_fw.udf, even with new stick?