Signal find?

[hadap123]

Hello all, I had DN 110/119 for 2-3 years then i switch to iptv for a year.

now i'm back on DN 110/119 my dish is bolted to the wall same position it was before but i am unable to get any S/Q. getting 0/0

tried the recommended settings, played around with TP settings nadda.

my FTA running flawless everything is running i just can't get signal...

did something change? so cheesed.....i read how DN closed all 3rd party signals....not sure what that means or what i'm reading or if its even related? lol

i'm pretty techy and this should have been easy PnP which it was till.....cant get signal WTF!?

[fn59]

Transponder info has changed. If you don't have the turbo 8psk module installed you won't get a signal by changing tp signals.

[hadap123]

Transponder info has changed. If you don't have the turbo 8psk module installed you won't get a signal by changing tp signals.

ty, i opened up to see what inside e2a8c1e0-05e9-4cf1-ba70-0ebb554cbfc1.jpg and it appears to be the same as the one their selling

hxxp://www.kijiji.ca/v-other-computer-products/mississauga-peel-region/sk900v-8psk-module-board-ilink-9500-9600-9800-hd-viewsat-9000/1122998384?enableSearchNavigationFlag=true

how recent has this change been made?

[Anubis]

I am not sure what the turbo 8psk tuner looks like for this unit but base on your comparison it looks the same. I noticed there was a new file posted here http://www.satfix.to/showthread.php?...96#post1165996 that you can try to see if that helps you out at all but based on your post of no signal also makes me question if the board itself is working. Give that file a try and see what happens. You have nothing to lose in my opinion.

[nobodyspecial]

There is a tp list in general rcvr section which has the updated info Some of the tps did not change You can check your alignment using them

[hadap123]

thanks all, will apply the file and play around with tp settings. i have the problem down to the receiver/receiver settings, tried a brand new cable same result...kinda puzzled cause it worked flawless for 2 years nothing was touched same hardware etc.

will report back once i find the error.

cheers

[hadap123]

not sure if this is right however...


i'm using DISH IN instead of ANTENNA IN. I was told to use ANTENNA IN but i'm getting nothing, with DISH IN i got S 90 right away.

managed to get S 90 Q 80 on one of the TPs while playing around.

i ran add channels and managed to add 45 channels, their all blank/black tho....fta running no errors....gonna add those new TP Freq and run it again...am i on the right track? Still have no picture but i feel i'm close

[Anubis]

Sounds like you are on the right track. Do you have a IKS provider and if so are you showing connected? If not then you need to have a active account.

[hadap123]

hello all, been busy with the holidays hope everyone is doing well.

i had some time today and added all the channels, found out i had wrong l/p + port for my service.

once i added the right TP + credentials BOOOOOM!

happy holidays cheers

ps. if you need help with this device shoot me message