BELL 9242 hd pvr

[monkeyu]

Hi All.
I have bell 9242 that was working perfect and resently i am having issues with it. Both tuner 1 and tuner 2 is not bringing in any 82 sat. What signal i have is 75 to 71 for sat 91 and 66 to 55 for 82 sat. I have 18 inch bell dish with 2 sw 21 switches. I have did check switch test on my pvr and it come up saying switches are all good. I noticed some transponders are ok and some are very low signal. Just to let u no the signal was both 100 percent before my issue. If anyone has any idea please feel free thx.

[nobodyspecial]

Hi All.
I have bell 9242 that was working perfect and resently i am having issues with it. Both tuner 1 and tuner 2 is not bringing in any 82 sat. What signal i have is 75 to 71 for sat 91 and 66 to 55 for 82 sat. I have 18 inch bell dish with 2 sw 21 switches. I have did check switch test on my pvr and it come up saying switches are all good. I noticed some transponders are ok and some are very low signal. Just to let u no the signal was both 100 percent before my issue. If anyone has any idea please feel free thx.

sounds like you need to tweak your dish

[dishuser]

pretty small dish considering bell has been using 20" or bigger(depending on location) for over a decade
since inception of sat 82 they did away with the 18"

[monkeyu]

Sorry my mistake it's 20 inch bell hd dish. I tried tweaking the dish with sat finder and it's still the same way. I'm wonder what else should I check. All that's left is 2 sw switches and my rg6 cable. I am wondering if it's my bell pvr that's going.

[monkeyu]

Eventually figured out my pvr was finished. Needs to be repaired