82 degrees

[jvvh5897]

I've read both now, and heck if I know! If the prov box gets it (82 degree TP 12530) OK, but the other boxes don't, then that implies all dishes are well pointed and cables are OK. But what could the prov box do that your boxes do not? I suppose there could be a single cable that has an odd dip in the response curve that could be an issue, but if there are two diff cables with similar issue, that would not seem to be the case. Maybe some issue with passing 22kHz pulses so that the switch does not always do what it should, but again two cables with same issue--odds are not--though maybe the 22kHz pulse levels on prov box differ from the FTA boxes. LNB LO could have drifted, but on two diff dishes--odds are not in the same way or the same amount and it would affect more than one TP.
That the prov box gets it, also suggests no terrestrial RFI issue.
Pretty much says that all possible issues are not a factor and you should have no problem.
Could be an odd corrosion on cable connectors at the box or some issue within the cable. Possible LNB voltage issue.

This post suggests others with the issue too:
http://www.satfix.to/showthread.php?...33#post1225433

[jon doe]

Yes you are correct. That other thread is going on the same direction.

I need to get this tested on a legacy LNB directly to the receiver and see if the same issue exists.
So far, I'm thinking some kind of odd DPP issue since all these instances (in this case) involve DPP equipment.
When I get a chance to test, I will report back. In the meantime, any other input is welcomed.
Thank you for your reply.

[jon doe]

http://www.satfix.to/showthread.php?...66#post1225466
Check here and lets work on this together?
Do you have DPP equipment on your dish?

[dryden]

what a dpp equipement ?

[jon doe]

Your LNB's on your dish. What kind are they?

[dryden]

i have a 3 lnb (standard ones)

[jon doe]

Then you must not have the same setup as the issue I am having. What you pointing at with 3 LNB and 82w in the equation?

[dryden]

so if i understand ..to not be capable to scan mlb networkchannel...the reason is the transponder not the receiver or lnb's ?

[Dells]

Post the Transponder number that it's suppose to be on and what channel number it's suppose to scan in as.

[dryden]

do you have a better place than lyngsat to check list of satellites and transponders ...i will post what i want ....on lyngsat i see nothing about mlb network in HD ....

[dryden]

i will post what YOU want ...sorry

[jvvh5897]

If you have the box settings correct, then my best guess is that the TP is weak or failing at the satellite. The prov box may have better low level response and can pull it out of the grass where your FTA boxes do not. It really is the last possibility. Maybe go with a bigger dish would be a fix.

[jon doe]

If you read in the other thread, I've already been working on this and I think all the info is there.

[jon doe]

12530 on 82w. Sid 1420.

[dryden]

i saw it and tried it ....no result....and on lyngsat these infos are not for mlb network channel...they are for cbssports network canada and cooking channel canada !!....