NF HD iks?

[bubbs16]

can i still use this receiver?

[Gabacho]

I'm pretty sure it will still work for IKS.

[nobodyspecial]

yes you can You should do a bit of reading in the threads below yours
There are also guides in the file section

[Mavrick]

Best to use an x-client on a laptop, xx-client_v2.5.57.273 works well and can be found here in the nfusion common files section.

[bubbs16]

oh i dont have to use Noi? can i use a desktop thats already hooked to the tv? looks like thats only flr linux ? i have windows 10

[Mavrick]

No you don't have to use noi, there are other options as noi can be a pain in the azz sometimes. Yes you can use a desktop pc but it has to be running windows xp or 7, I don't know if that xx-client works with anything else but windows xp or 7.

[bubbs16]

ok noi is a pita and freezes nonstop. there has to be another way. i was reading aouit a 5.04 bin ? something not havnig to use a pc or have a specific router and setup. would it still work ?

[Longster]

No you don't have to use noi, there are other options as noi can be a pain in the azz sometimes. Yes you can use a desktop pc but it has to be running windows xp or 7, I don't know if that xx-client works with anything else but windows xp or 7.

You can run noi with windows 10, that's was I did when I was moving to a new house and is working great, but I don't like having computer running all the time, now I use linksys dd-wrt wrt54g.

[jets]

You can try to run xx-client_v2.5.57.273 on windows 10 in compatibility mode if windows 10 even offers that, not sure.

The other easy way use a dlink 601 or 615 running openwrt. That allows access to the file system in the router and then you can run xx-client atheros in the router.

[wedalan]

You can try to run xx-client_v2.5.57.273 on windows 10 in compatibility mode if windows 10 even offers that, not sure.

The other easy way use a dlink 601 or 615 running openwrt. That allows access to the file system in the router and then you can run xx-client atheros in the router.

When using this how does it connect to the nfusion receiver, serial cable or network cable?

[Mavrick]

When using this how does it connect to the nfusion receiver, serial cable or network cable?

network cable