Bluetooth issue

[maloque]

Hi, I wonder why my buzztv don't want to activate bluetooth?

I tried to make a factory default but no difference.

So I'm no able to pair my remote...

Any idea? Thx

[Emporium]

Do you have WiFi enabled ?

Are you wired or wireless ? If you are wired, just "try" to enable and connect using WiFi and try again.

[maloque]

Do you have WiFi enabled ?

Are you wired or wireless ? If you are wired, just "try" to enable and connect using WiFi and try again.

For the moment Im wifi.

I tried wired and disable wifi, same thing
Bluetooth won't activate

[Emporium]

When you say you did factory default, did you do the reset through software menus, or via the "Pin" method and going through the recovery screen ?

Here is the procedure. Different buzz box, but procedure is the same.

https://youtu.be/9l1x3KJl_jE

[Maestro701]

Hi, I wonder why my buzztv don't want to activate bluetooth?

I tried to make a factory default but no difference.

So I'm no able to pair my remote...

Any idea? Thx

You can go into Bluetooth settings and manually add device. Bluetooth is always on so it should "see" remote

[dishuser]

1.On your BuzzTV device, navigate to Settings > Remotes & Accessories
> toggle Bluetooth to ON. Then choose: Add Accessory.
2. On the BT-250, press and hold the VOL - & the OK
Button for 3 seconds. Once the red light starts flashing,
release the buttons.
3. Select “BuzzTV BT-250” on your BuzzTV Device.

[maloque]

1.On your BuzzTV device, navigate to Settings > Remotes & Accessories
> toggle Bluetooth to ON. Then choose: Add Accessory.
2. On the BT-250, press and hold the VOL - & the OK
Button for 3 seconds. Once the red light starts flashing,
release the buttons.
3. Select “BuzzTV BT-250” on your BuzzTV Device.

Yeah did it a lot of time but bluetooth dont wamt to turn on on the box. But I solved my issue with hard reset ��

[maloque]

When you say you did factory default, did you do the reset through software menus, or via the "Pin" method and going through the recovery screen ?

Here is the procedure. Different buzz box, but procedure is the same.

https://youtu.be/9l1x3KJl_jE

Didn't know for the hard reset, but thx it solved my issue.
It didn't want to go in recovery mode, it just went no signal 3 times.

But it solved the issue anyway, thx

[Emporium]

Didn't know for the hard reset, but thx it solved my issue.
It didn't want to go in recovery mode, it just went no signal 3 times.

But it solved the issue anyway, thx

OH.. Glad it helped.

For next time.. The classic, if I recall (not in front of my box right now), has a small button on the left side (as you look at it from the front). Serves same purpose as putting pin in the A/V hole. So you hold the button, while you plug the box in, and hold it till you get the recovery screen.

[maloque]

OH.. Glad it helped.

For next time.. The classic, if I recall (not in front of my box right now), has a small button on the left side (as you look at it from the front). Serves same purpose as putting pin in the A/V hole. So you hold the button, while you plug the box in, and hold it till you get the recovery screen.

You mean the pwr button? It has the dame effect of tge av pin ��*♂️

Thx

[Emporium]

You mean the pwr button? It has the dame effect of tge av pin ��*♂️

Thx

LOL.. I have never used it as a power button (since I just use the remote), but yes