Nimiq 6 new satalite some TP's lost weak signal

[redhawk]

Sonicview 8000 HD re scan no change, any suggestions ? All good before April 1st 2024

[foresight]

From what has been posted as of late and from what has happened in the past try this. One example below.

Old - 12559 20000 H 5/6 QPSK

New -12559 21500 H 2/3 8PSK T****

[foresight]

Another example or two if.

N1.jpg N2.jpg

[Actv8]

I am wondering if anyone is getting signal for TP 12253 21500 V T8, 12268 21500 H T8, 12282 21500 V T8, 12297 21500 H T8 and 12370 21500 V T8?

[jets]

No signal yet but on some boxes a network scan finds the new TP's in Turbo 8PSK but they are not active yet, just in data steam indicating they will be active at some point...

[squirtNcider]

So, if I try to set one of these up, which never had B3V on it, should I rescan and then change the TP's or do it before scanning. Kinda confused as some people are saying a rescan doesn't work.

[auggie]

So, if I try to set one of these up, which never had B3V on it, should I rescan and then change the TP's or do it before scanning. Kinda confused as some people are saying a rescan doesn't work.

if bev wasn't setup to begin with, then your going to have to scan in the channels anyways/regardless if you change the
TP's or not.

[squirtNcider]

So it doesn't matter if I scan the channels before or after changing the TP's then?
Been reading too much and prolly making this more difficult than it has to be....lol.

[auggie]

So it doesn't matter if I scan the channels before or after changing the TP's then?
Been reading too much and prolly making this more difficult than it has to be....lol.

i don't have a Jynxbox to play with, so not sure, on my SV8000 i changed all the TP's as stated and did a sat. scan
right after, a lot of the missing TP's/channels came in But not ALL OF THEM, Beaver is in the process of making a whole
Bunch of changes to 91 from 82 etc. how all this is going to Play out is "ANYBODY'S GUESS"
For right "NOW" It is called "TESTING TESTING" Until further INFO COMES ALONG

[gig63]

Well my 88 year old mother is starting to complain, she cant see her shows.
I have her on a Dream link t5, but i have 2 working sv-8000hd that i haven't been using because i have been doing IPTV
So a question do you change all the sat 91 tps
and do you scan for channels for 91 after all changes
Thank you everyone for your time

[auggie]

Well my 88 year old mother is starting to complain, she cant see her shows.
I have her on a Dream link t5, but i have 2 working sv-8000hd that i haven't been using because i have been doing IPTV
So a question do you change all the sat 91 tps
and do you scan for channels for 91 after all changes
Thank you everyone for your time

Have a look here post #2 https://www.satfix.to/showthread.php...4-Changing-tps

[gig63]

I took and did a factory reset and when I scanned the 91 sat it changed everything on its own