discussion of bev tp changes

[jackson]

Hey lost all channels on my DL t5 (I have a sonic view HD and a jynxbox too but not using currently) was only watching 82 only so didn't switch
have scanned several times no luck
Should I switch receivers and scan?
or just go with IPTV now (I really like IKS so don't want to)
any help would be greatly appreciated
thanks
Jackson

[auggie]

The T5 is Basically a Door stop now, can't handle the changes that are ON GOING
I have shelved mine & currently using my SV8000HD

[dishuser]

Hey lost all channels on my DL t5 (I have a sonic view HD and a jynxbox too but not using currently) was only watching 82 only so didn't switch
have scanned several times no luck
Should I switch receivers and scan?
or just go with IPTV now (I really like IKS so don't want to)
any help would be greatly appreciated
thanks
Jackson

t5 doesn't work and you ask if you should switch?

[df2002]

Hey lost all channels on my DL t5 (I have a sonic view HD and a jynxbox too but not using currently) was only watching 82 only so didn't switch
have scanned several times no luck
Should I switch receivers and scan?
or just go with IPTV now (I really like IKS so don't want to)
any help would be greatly appreciated
thanks
Jackson

I've made the switch from Dreamlink to a Junxbox.
After getting a Jynx/Junx configured and scanned in, it will do the job as a full replacement to what you had with Dreamlink.
At this time you'd need to use both 82 and 91 to get a full channel list. However, this is changing almost weekly as channels keep getting pulled from 82 and added to 91.

[john deer]

First of all thanks to blackjack for his post and info, it worked for me on my old jynxbox ultra hd v30. I get strong locked signals on all transponders and many stations with auto scan. My issue is that I get many duplicate station numbers and on some stations only sound no video. Should I delete all stations and start over? Any suggestions would be appreciated

[df2002]

First of all thanks to blackjack for his post and info, it worked for me on my old jynxbox ultra hd v30. I get strong locked signals on all transponders and many stations with auto scan. My issue is that I get many duplicate station numbers and on some stations only sound no video. Should I delete all stations and start over? Any suggestions would be appreciated

I am using Junxbox, which from my understanding is a Jynxbox clone. So menus should be the same.

If you go to menu, channel and TV channel list..... you will see all your channels on that page including the duplicates.
For duplicates, one will be on 91, and the other on 82 (nimiq 4).
When you click on each channel, you will see the transponder information so you will know which one is which. The working (91) channel should come up live display in the top corner, the other channel (most likely 82 nimiq4) will stay black.

You can manually EDIT and DELETE the duplicate Nimiq4 channels from this page without having to start all over.

This will probably be a weekly event as channels keep getting shuffled over to 91. A good practice seems to be to run a few separate 91 scans and then go into that channel menu and look for duplicates. This means the channel has moved over to 91, and you can remove it from 82.

[shedevil]

anybody knows why I see Nimiq1 instead of Nimiq6 for 91 sat? when I scan 91 I have many TPs skipping so I dont get many channels on 91

thanks

[auggie]

anybody knows why I see Nimiq1 instead of Nimiq6 for 91 sat? when I scan 91 I have many TPs skipping so I dont get many channels on 91

thanks

That's not unusual, my SV8000HD Says Galaxy (91W) For Nimiq 1,3 under Sat heading or Dish Settings

I believe that's in the software, which hasn't been updated EVER or For a long time. Also have you made "ALL" the TP changes
that are needed Now for Sat. 91, Bev is STILL Mucking with things (82 channels to 91) etc. and aren't done till 82 Sat. is "HISTORY", That's my Take on it anyways ?

[shedevil]

That's not unusual, my SV8000HD Says Galaxy (91W) For Nimiq 1,3 under Sat heading or Dish Settings

I believe that's in the software, which hasn't been updated EVER or For a long time. Also have you made "ALL" the TP changes
that are needed Now for Sat. 91, Bev is STILL Mucking with things (82 channels to 91) etc. and aren't done till 82 Sat. is "HISTORY", That's my Take on it anyways ?

thanks Auggie, yes I did all the changes in the TPs. At first I scanned 91 and got the few channels that moved from 82 to 91 but since we moved the dish to get a better signal with 91 and lost 82, now when I scan 91, I am not getting any new channels and most TP are just skipping. Damn Bell

[auggie]

You may need to scan 4 or more times to pickup extra channels possibly ?

With all the changes going on, it is a "Work In Progress" with the Remaining FTA receivers that are LEFT.

[john deer]

The only channel that I am missing so far that is important to me is NBC east. Does anyone know what channel number it is on or transponder information

[ftafrank]

I get it on channel 2280 on my jynxbox. Transponder 12355 bell 91

[j11362]

got a jynx box lite,installed the 1.11 bin and factory reset got all the channnels on 91 after transponders changed.try it worked for me.

[anthonym41]

J1 any pics for proof don't wanna delete everything for nothing

[stagalee]

Good morning, can someone please post the process how to delete the duplicate channel on the jynx box. thank you.