sat9182.xyz Channel List

[redrooster1]

You want to do a Sat. scan not Blind Scan, I would hook up direct (no switches etc.) to each Sat
and do a Sat. Scan on each one, you may have to do this Many Times, for the receiver to pick up the missing channels
because it tends to skip over TP's etc. Go through the list of TP's and make sure you have good Quality of signal on them before
you do your Scans.

so i disconnected sats from switch and scanned each TPs 1 at a time on 91 and then did same on 82. before scanning i checked each tp for good signal, still missing some channels like Kitchener news it was 2584 on my jynxbox. What next. do i delete all channels again repeat what i did and make note of the ones that are skipped and if so how do i scan those tp without scanning all 34 tp. Thanks ahead of time.

[auggie]

With all the changes that are Happening & still to come, it's going to be HIT-&-MISS with any box that we use
I'm missing channels as well, but I'm not Dwelling on them etc. I Still have lots to watch at this present time to keep
Me entertained, Who knows what's going to happen down the road, enjoy what we have left for as long as it Lasts.

[Flipside786]

Is anyone getting any of the Crave (1, 2 or 3) or Hollywood Suite (70's,80's,90's,00's) channels?

[dishuser]

Is anyone getting any of the Crave (1, 2 or 3) or Hollywood Suite (70's,80's,90's,00's) channels?

https://www.satfix.to/showthread.php...69#post1409469

[ftafrank]

Is anyone getting any of the Crave (1, 2 or 3) or Hollywood Suite (70's,80's,90's,00's) channels?

They all come in on my jynxbox. Go to installation then motor type and change to Diseqc1 than go to motor settings and move east. I know the dish doesn't move but when you do manual scan one at a time they will come in. May also have to change the polarity. Make sure your on satellite 91.

[Spliceguy]

They all come in on my jynxbox. Go to installation then motor type and change to Diseqc1 than go to motor settings and move east. I know the dish doesn't move but when you do manual scan one at a time they will come in. May also have to change the polarity. Make sure your on satellite 91.

You are getting the Hollywood Suite channels on 338-341?

[redrooster1]

how come when I scan it skips over transponders. Ive gone in and tried to change the polarity but that didnt do anything. Is there something im doing wrong or thats normal. Thanks

[auggie]

how come when I scan it skips over transponders. Ive gone in and tried to change the polarity but that didnt do anything. Is there something im doing wrong or thats normal. Thanks

If you are using a Jynxbox (not sure on the junxbox) that is it's NORMAL OPERATION, that's why others have said
You have to do Multi-Scans in "Hopes" of picking up extra channels, I suggest hook up direct (No switches etc.) when doing
your scans, Also depending on the Dish Equipment you are using (legacy or DP or DP+ LNB's ETC.) it "Could Be a Power Issue"
Not enough power from Receiver Box to feed the Equipment being used Maybe.

[mirove]

how come when I scan it skips over transponders. Ive gone in and tried to change the polarity but that didnt do anything. Is there something im doing wrong or thats normal. Thanks

If you have a junxbox I found it best to use manual scan it will bring up a list of transponders highlight the one you want to scan and press the blue button, then select OK.
If it comes back with "Program not Found" message just select OK, then hit the blue button to repeat the process until it finds the channels.
I had to scan some transponders as much as 12 times before it finally found the channels.

[ftafrank]

No not getting those.

[Flipside786]

Sorry late reply, thank you!

[redrooster1]

really 12 times okay well i will put on my patients pants and tackle that on the weekend. LOL.Thanks.