Bypass flash card

[trimnails]

Some were I seen (How to) on how to bypass 1GB flash card on cw4k. Any info please pass on.

[mindbender]

It was her befor the purge . I got a lot of the info but I mist that one mybe someone got it and will repost it.

[Benney]

This is old but here is the info.

[trimnails]

OK tried to bypass compact 1GB flash card logged in OK typed (fdisk/dev/hda/user/bin/flash.part) It reply's as (fdisk/dev/hda/user/bin/flash.part not found). any Ideals why.

[Benney]

OK tried to bypass compact 1GB flash card logged in OK typed (fdisk/dev/hda/user/bin/flash.part) It reply's as (fdisk/dev/hda/user/bin/flash.part not found). any Ideals why.

Read it again fdisk /dev/hda or sda < /usr/bin/flash.part <enter>

[trimnails]

Read it again fdisk /dev/hda or sda < /usr/bin/flash.part <enter>

Well I read it again with no luck typed it exactly as you have it I tried with spaces no spaces it reply's as.(no such file)

[pbmckenz]

i made it to mount /dev/hda1 /mnt/flash / mount -t iso9660 /dev/cdrom /mnt/cd but mount fail
space in pictures look like above

[pbmckenz]

first u put space fdisk(space) /dev/hda or sda < /usr/bin/flash.part <enter>

mke2fs(space) /dev/hda1 or sda1 <enter>

[trimnails]

Got it to mount with space fdisk(space) /dev/hda or sda < /usr/bin/flash.part <enter>
like pbmckenz said. But now I'm stuck on second mke2fs(space) /dev/hda1 or sda1 <enter>replies mke2fs: invalid blocks count-or

first u put space fdisk(space) /dev/hda or sda < /usr/bin/flash.part <enter>

mke2fs(space) /dev/hda1 or sda1 <enter>

[pbmckenz]

mke2fs(space) /dev/hda1 or sda1 <enter>
work for me on 40 and 20gig hard drive
third part works
forth does not

[trimnails]

500 gig hard drive.do you thing that my be the different.

[pbmckenz]

no had 1tb sata that made 2st part step 2
40 and 20gig ide made the same
do not work mke2fs /dev/hda1 or sda1
if u using sata sda2 it should said

[trimnails]

Thanks I'll check ever thing out as soon as I get a chance and reply back.

no had 1tb sata that made 2st part step 2
40 and 20gig ide made the same
do not work mke2fs /dev/hda1 or sda1
if u using sata sda2 it should said

[trimnails]

OK checked ever thing out it is WD1TB hard drive connected to sata port 1, but still can't get past step 2.

[pbmckenz]

have u tried 1.0.1.13 or original cw restore disk i looking for mine