Reconfigured a Linksys Router WRT65GL v1.1

[khoifish89]

It has been awhile since I last use this router. This router does not have stock firmware, it has tomato firmware similar to DD-WRT. I have completely forgot how to configured. The last time I used this was when I had AT&T DSL. Since then have switch to TWC HSI and I want to reconfigured with my current setup to extend the wifi signal. To use this router as a repeater. Can anyone help me.

[bbking67]

I'd go to DD-WRT and then use the client bridge mode to extend wireless (assuming the devices to be connected to the device zare wired).

Alternatively there is WDS, but it's harder to set up.

[StanW]

I'd go to DD-WRT and then use the client bridge mode to extend wireless (assuming the devices to be connected to the device zare wired).

Alternatively there is WDS, but it's harder to set up.

Setup your dd-wrt as a repeater and you can connect to it wired or via wifi.

[ftaplace]

you can fpllow this xxx dd-wrt.com/wiki/index.php/Client_Bridge

[homer_™]

Tomato can be configured as a wireless client bridge access point, but not a repeater.