hi need to nkow if w 1000.2 for 110, 119, 129 and 2 receiver do i need external switches.. thank u
hi need to nkow if w 1000.2 for 110, 119, 129 and 2 receiver do i need external switches.. thank u
There's a built in switch.
119 on port 1
110 on port 2
129 on port 3.
Depending on the receivers you're using you may need a dpp power inserter. Check the max. power output rating of your receivers. Should be a label near sat. input connector. I think the dpp lnb's require ove 600mA. If your receivers are less you'll need the power inserter.
Further clarification is that the 3 connector cables coming out of the 1000.2 lnbs are for 3 receivers. Thus if you need 4 receivers or more you need a separate switch. Just setup the ports as described by fn59 above.
thank u guys i got nextfta and cnx convert to ilink , so for the info i got w u guys i be ok w the internal switche built in 1000.2. thank s again...
are u telling me that 1000.2 wont get 3 sat for each box 110 119 and 129 on each box ??? if that is the case i better get a regular dish w 3 lnb dual LNB and 2 switchs then i get 110 119 and 129 on each box.. now are u sure that w 1000.2 i can not get 3 sat on each box ????
ok i got u now thank u...