Printable View
How do you get it to scan on SV 8000. Tried 12530, 21500, H, 3/4A, Turbo 8. Nothing scans (scan failed). The quality is 100% and strength is 58% for this TP.Quote:
Originally Posted by guy
Also all the channels are coming in at MPEG 4 720i. Should it not display 720P on SV 8000?
quality looks low to low turn network search off very very impotant then push scan tp mpeg 4 720 is rightQuote:
Originally Posted by danny
From my read anything above 50% quality wise should work. Although that would be bare minimum and would not be recommended as it would cause issues. If one is getting 100% quality then it doesn't get much better. Problem with these stb's is there meters are not always accurate. As to the SV8K showing 720i seems to be a common issue. Jmo but my guess would be an issue in the way the sw was wrote years ago. Guess it could explain the slight shutter issue as well. I do know it will show 720p with the atsc tuner. This issue has came up in other posts so I did a little googling a while back. And from what I read at one time there was some thought of having a 720i resolution prior to around 2008 if memory serves. But in the end they decided on just 720p. If that was the case then it is possible considering the date when the SV8K was manufactured and sw wrote they may wanted to cover all the basis and it was wrote in just in case. The date fits anyway as it all falls around 2007 and 2008 from jump. One can google i vs p with the resolution and find out the difference.Quote:
Originally Posted by danny
If you see the sat. info appear in the light blue area in the upper right hand corner while in dish settings you should be good. More quality the better as the strength side of the meter can be fickle. Seen it anywhere from 54 to zero with strength and scan depending on bird if the quality was strong. Strange tp as it does weird things at times
I have 4 8000s and none would work with your low quality the signal means nothing check your other tps for quality and you will see
The quality and signal are same on all other TP's, and they all scan fine, except this TP does not scan. The sat. info appear in the light blue area in the upper right hand corner on this TP. So I don't think the quality is the issue.Quote:
Originally Posted by guy
Let me know if I am inputting the TP info correctly. I have it as 12530, 21500, H, 3/4A, Turbo 8. Should the FEC be 3/4A, as I have it or should it be something else?
S-54 Q-53 here and works but not even close to ideal. With the info you have and a reading of S-58 Q-100 it should work. Of coarse I maybe missing something as it's early and my eyes are feeling weak at the moment along with my brain. A little better reading with a different stb. Also seen quality levels go up and down slightly depending on the time of day. Figure it is due to being on the fringe and or atmospheric conditions. That issue doesn't seem to be specific to just one tp. As been said the higher the S&Q the better. Best to tweak the dish off the weakest tp.
The info for 82W TP 12530 showing on Lyngsat (and some others) may be old, but it shows the FEC to be 2/3 not 3/4, maybe this is a problem.
More info:Code:https://www.usatellites.com/2018/07/nimiq-4-820w-ku-band-satellite.html
Most updated info on that bird below that I'm aware of:
82W
1.12224 21500 (V) 2/3 Turbo 8PSK
2.12239 21500 (H) 2/3 Turbo 8PSK
3.12253 21500 (V) 2/3 Turbo 8PSK
4.12268 21500 (H) 2/3 Turbo 8PSK
5.12282 21500 (V) 2/3 Turbo 8PSK
6.12297 21500 (H) 2/3 Turbo 8PSK
7.12311 21500 (V) 2/3 Turbo 8PSK
8.12326 21500 (H) 2/3 Turbo 8PSK
9.12341 21500 (V) 2/3 Turbo 8PSK
10.12355 21500 (H) 2/3 Turbo 8PSK
11.12370 21500 (V) 2/3 Turbo 8PSK
12.12384 21500 (H) 2/3 Turbo 8PSK
13.12399 21500 (V) 2/3 Turbo 8PSK
14.12413 21500 (H) 2/3 Turbo 8PSK'
15.12428 20000 (V) 7/8 QPSK'
16.12443 20000 (H) 7/8 QPSK
17.12457 21500 (V) 2/3 Turbo 8PSK
18.12472 21500 (H) 2/3 Turbo 8PSK
19.12486 21500 (V) 2/3 Turbo 8PSK
20.12501 21500 (H) 2/3 Turbo 8PSK
21.12516 21500 (V) 2/3 Turbo 8PSK
22.12530 21500 (H) 3/4A Turbo 8PSK
23.12545 21500 (V) 2/3 Turbo 8PSK
24.12559 21500 (H) 2/3 Turbo 8PSK
25.12574 21500 (V) 2/3 Turbo 8PSK
26.12588 21500 (H) 2/3 Turbo 8PSK
27.12603 21500 (V) 2/3 Turbo 8PSK
28.12618 21500 (H) 2/3 Turbo 8PSK
29.12632 21500 (V) 2/3 Turbo 8PSK
30.12647 21500 (H) 2/3 Turbo 8PSK
31.12661 21500 (V) 2/3 Turbo 8PSK
32.12676 21500 (H) 2/3 Turbo 8PSK
--------------------------------------------
Happens to all the SV 8000hd's I know of.Best results are to use component cables rather than hdmi,& set resolution to 720p.Not a cure, but it's much better.Quote:
Originally Posted by jon doe
Can somebody check their setting on the Sonvicview 8000, and let me know what settings they have for this TP?Quote:
Originally Posted by Terryl
you have the right settings
the signal strength isnt that important you need better quality its what counts not sig strngth
I have lots of tps shoe high 90s quality and no signal--0
maybe you are to far south ?????????
Quality
My quality is 100% and strength is 58%.Quote:
Originally Posted by guy