So you will need to re-scan the dead TP's using 21500 SR, 3/4A FEC and in TUBO8PSK mode. In manual scan on that STB if I remember correctly.Quote:
Originally Posted by bigbro
Printable View
So you will need to re-scan the dead TP's using 21500 SR, 3/4A FEC and in TUBO8PSK mode. In manual scan on that STB if I remember correctly.Quote:
Originally Posted by bigbro
not going to work on the 360 though
that one will be useless soon
fyi
made in china . com and aliexpress .com have lots on jynks and knock offs available
Are all sd chanels down my hd is fine using a jynx box
you need to make some changesQuote:
Originally Posted by Rickhardmb
it's been posted many times in this thread
Agreed. Unfortunately I did a factory default. And when u try rescan.. u get nothing. Luckily I had an old jyxbox, and when I did the changes, 12500 and turbo.. most all channels are working. . I guess the next question is how do you transfer the channel data from one box to another?Quote:
Originally Posted by RonTheRipper
is it 12500 or 21500 and turbo?
Hi, it's 21500 and turbo 3/4Quote:
Originally Posted by anthonym41
CMT on CH 575 is now gone on sat 91 as everybody here already knows.
Is it available or will it be available after the dust settles on viewsat HD boxes or sonicview hd8000.Thanks
I have Fox news on a Jynxbox v6... Not that I watch it but it works here.Quote:
Originally Posted by redrooster1
I have noticed that the Jynxbox is not getting a 7 day EPG. Anyone recall it it was posable before the recent changes?
I only pull the Jynxbox out today was using Dreamlink.
With what's going on with the changes, Personally I wouldn't worry about a 7 day EPG
Any EPG at this time is OK with me etc.
auggie,
That's not my point. I am wondering why it's does the EPG not work? Be nice to know if the EPG is working properly in a sub.
I just wonder that after some time they will fix something in the stream that allows it to work and other STB to scan channels again.
When the south provider did this everything worked. I just cant remember if they went from MPEG 2 to MPEG 4 HD or did they move some MPEG 2 to MPEG 4 SD also that's maybe the only difference.
Quote:
Originally Posted by jets
epg is working fine with ird subs
Hi all, I am using the Jynxbox...in an earlier post sat9182 said to: change your transponders 1- 18 on 91 to turbo 8psk and 21500 2/3a...
I don't understand, where do I change "to turbo 8psk" and what is "21500 2/3a", I'm not a technical person so you will have to walk me through it.
Any help you can provide would be greatly appreciated, as I just resubscribed and wasn't told or aware of these new problems with IKS, had I known I would have probably gone a different route. I'm a "play'n go", I have no techinical skills and at my age now it's just about watching tv.
Thanking you guys in advance.
Bev is doing a whole mess of changes/testing as of Now (MPEG 2 to MPEG 4 & others) for provider IRD's that may not be a problem on the EPG & Such, But for FTA Boxes it would be a problem cause they can't Auto adjust to the changes being madeQuote:
Originally Posted by jets
without updated software/firmware possibly, case in point the DL-HD-T5 looks like it's DOA OR DITW=(dead in the water)
Just my 2-cents worth
Read post #79Quote:
Originally Posted by Bayman1953
Would you be able to provide the link to post #79?Quote:
Originally Posted by auggie
look in the top right corner of postQuote:
Originally Posted by Bayman1953
you'll have to go back a page
I have changed the frequency on both transponders i have signal on both but my jynxbox keeps using a different transsponder. What am i doing wrong
you have to change ALL Sat. 91 TP's 1-19 using 21500 SR, 3/4A FEC and in TUBO8PSK modeQuote:
Originally Posted by Rickhardmb
I don't have a Jynxbox but it should be located in Dish settings heading under Transponder # bring up a list of 1-32 Transponder #'s this is where you should be able to edit each TP # as stated.
I have a SV8000, should I change all TP's to 21500 SR, 3/4A FEC and TUBO8PSK mode and rescan?
Read post #101 which apply's to all FTA Boxes that the TP's can be changed, for the time being, with whats happening currentlyQuote:
Originally Posted by bigbro
don't know if it will last or not, "My best Guess"
In the Jynxbox it is only necessary to change the mode from QPSK to TUROB and the symbol rate from 20000 to 21500.
Do this under manual scan, RED button for edit TP.
So, as of now, the only 2 receivers that 'may' work are the Jynxbox V6 and the sonicview 8000? A few friends and I all have DL HD or T5's so I've been looking around for replacements seeing that the DL boxes may be doorstops soon......
I came across a Viewsat 9000HD but thought I'd ask here first to be sure.
Also, are the HD boards in the DL receivers good for either of those boxes?
Far as I recall any JYNXBOX after Ver. 3 is a CLONE, Most HD modules etc. are "NOT" interchangeable
These ? should be asked/answered in the appropriate FTA receiver forums/discussions
My bad then....Just thought having the receivers that possibly work in the Bev TP change thread together.
SV 8000 I just disabled the 82 transponder undone cable Every thing working much better now gona wait it out abit instead of going crazy
AT this "CURRENT TIME" That I & others like sat.9182, Jets, etc. have posted is the FTA RECEIVERS Currently WORKINGQuote:
Originally Posted by squirtNcider
with TP Changes etc. are the JYNXBOX, SV8000HD, haven't see/heard of any other boxes listed that work "YET"
This is a work in progress, again whether this lasts or not is anybody's "BEST GUESS"
I am no tech on this FTA Stuff, just trying to help where I can, & pass-on info where needed.
everyone should email formuler and ask them to release a fix for there box dreamlinkt5 or make it open source
Hi, has anyone done up a "tutorial with screen shots" on how to make the necessary changes to the Jynxbox Receiver? I'm not a technical person and do not have a Clue how to make those changes.
Thanking you once again for your assistance.
you have to read this all on your ownQuote:
Originally Posted by Bayman1953
https://www.satfix.to/showthread.php...61#post1391661
Hello auggie. Very WELL said my friend. You are so right with respect to work in progress! Your reply is highly respected. Thanks for your post and lets just wait and see! Good things happen to those who wait.
Sonicview 8000hd will rescan and find those new TP's
Turbo8psk, mpeg2,21500
I think I found a 44 hour EPG on 12428 vertical channel 199 NTV.
I've done a bunch of messing around, and I can confirm that best I can tell, my ViewSat 9000HD (which has the 8PSK module installed) can not tune into the new/changed transponders, even after editing the symbol rate and modulation.
If anyone with more technical knowledge of this stuff than me has any insight into why none of the existing receivers except the Jynxbox seem to be able to handle these changes, I'd be very curious to hear it.
Yes, The viewsat max hd and 9000 hd will not tune the new TP's. Sonicview 8000hd will with just a sat rescan.
Need to be able to change FEC to 3/4a.
So far, only the SV8000HD, old Jynxbox (V3?) are able to do so. A new 'Junxbox' off AliExpress was said to work also.
Nfusion hd will rescan all channels if you enter info manually
I've just got a "Junxbox" in today from AliExpress, and can confirm that it seems to be working after manually making the changes. It doesn't even seem to let you manually set the FEC, and it takes while to gain lock (like 15 seconds,) so it seems to just be trying everything it can until it finds one that works.Quote:
Originally Posted by squirtNcider