Wishlist for the Pinwheel hd series

[ftatv0001]

Channel rename needed some channel name on 9000 series not correct and need to make change.
Channel Delete for singel channel

[fta4me]

channel delete is already there

press ok on channel list
press red for all
press mark button
mark the channel(s)
delete
exit
done
done

[rohin123]

Please test about terrible ghosting happening in sd on sony tv's. less visible in hd. Mostly around any moving object on the video, there are pixels which only appear for any sony tv. (60in). any other reciever does not have this. Overall the sd is a little bad compared to other boxes. But they're constantly releasing fixes, so I hope this message about sd quality goes through. The new file seems to fix the last posted problem about 1080p option not sticking in AV settings. This seems to be fixed with other options for video source as well so that is great!

[Nostradamus]

why don't you try your tv in 720p and see if the ghosting goes away. any time you do video conversions you will lose some quality. I think with a tv that large it is just more noticeable. If that is not the problem then it is TV specific but I don't see anybody else reporting a similar issue. At the same time I can't see any manufacturer investing megabucks in a specific large screen model to troubleshoot an isolated problem

[holly2012]

I have a 60" LG smart led tv and a pinwheel connected and I don't have that problem I would say it more of an adjustment on your tv

[rohin123]

The issue stays in 720p format. The dealer said that this is a issue with pinwheel for most sony tv's only (model inspecific), and does not go away with any setting change on it.

Update: The problem is narrowed down to the receiver broadcasting in around 50fps to the tv, and the tv expecting 60fps. No option fixes it. As far as I think this is the issue according to online searching. Just putting it out incase someone is reading and knows a fix

[fta4me]

The issue stays in 720p format. The dealer said that this is a issue with pinwheel for most sony tv's only (model inspecific), and does not go away with any setting change on it.

Update: The problem is narrowed down to the receiver broadcasting in around 50fps to the tv, and the tv expecting 60fps. No option fixes it. As far as I think this is the issue according to online searching. Just putting it out incase someone is reading and knows a fix

50hz is only for pal tv

Try press v.format on remote until it is better

[Kingdom]

close caption

[rohin123]

Hi, and thank you for the comment. I looked into what you said and I am wondering if I have something set up wrong. When I do press the v format button to switch between different qualities. I get options ending in 50. such as 1080p and then 50 at the end which I thought was the 50hz framerate i was referring too. all options have 50 at the end and the ghosting around colours doesnt go away. Do I have it in pal mode or something?

[Nostradamus]

you are right about the 50 being the refresh rate, now why it iss doing that is weird. I can't make mine display anything other than 60Hz... is it possible the tv is somehow running at 50Hz instead of 60 and everything else has adapted to that video format?

[fta4me]

is your TV multi region?

50hz will only show if tv supports pal/ntsc

check your tv settings to make sure it is set to ntsc only mode

[fta4me]

i believe it is there

go to a channel that may be broadcasting cc

and press subtitle on remote

if closed caption is broadcasted then it will appear on screen

[rohin123]

is your TV multi region?

50hz will only show if tv supports pal/ntsc

check your tv settings to make sure it is set to ntsc only mode

Thank you Nostradamus and fta4me for replying.

You confirmed that it displays 60 on your end. I will look at the tv manual and see where the error lies, or connect a hdmi monitor to report back if i see the 60 when choosing in vformat. I will report back.

[looper]

time zone for newfoundland, ca would be nice, -3:30

[granpaw]

I would like to see the following if possible

1) The epg to only show channels for the sat your pointing at with an option of "all sats" + B*v epg improvement
2) Delete sat to include deleting all channels within the selected sat
3) Search (blue button) to scan only that sat but will delete any channels present first
4) A button on the remote assigned to choosing a sat that corresponds to the epg info and drives the motor there etc.
5) switch/port settings within the motor setup menu

Thank you team pinwheel