MLB HD on Nimiq 82

[brakes]

I have tried everything I can think of to get this channel but it will not scan in. Anybody out there have a solution for this?

[nobodyspecial]

Not at this time

[punkyt26]

this is the same thing that happen when NFL NETWORK was added,,it showed up on lyngsat first before we was able to actually scan and receive the channel...it's coming be patient... i can't wait

[jets]

Scan these TP Nimiq 4 set at 21500 SR, Turbo 8psk;

12253
12282
12384
12370
12399
12618
12632

Do it any night there are a lot of games

[nobodyspecial]

mlb network is on 24/7

[n3fta]

Did anyone get MLB Network working on 82?

[johnnylarue]

It is on 12530. The FEC is weird on that TP. Change the FEC to 3/4A, from 2/3. Rescan, and you will get all the channels on that TP, Also, make sure the polarity is Horizontal.

[Glatt]

No baseball on that channel!!

[n3fta]

It is on 12530. The FEC is weird on that TP. Change the FEC to 3/4A, from 2/3. Rescan, and you will get all the channels on that TP, Also, make sure the polarity is Horizontal.

I get no signal with horizontal polarity on 12530.

[nobodyspecial]

I get no signal with horizontal polarity on 12530.

change fec too?

[n3fta]

change fec too?

Yes I made all suggested changes. I don't have 3/4a though just 3/4

[johnnylarue]

Yes I made all suggested changes. I don't have 3/4a though just 3/4

Try changing the FEC to auto, if the 3/4a does not show up. This adjustment works on my SV8000 and genpix , but i have not tried it on my T5.

[n3fta]

Try changing the FEC to auto, if the 3/4a does not show up. This adjustment works on my SV8000 and genpix , but i have not tried it on my T5.

Even when set to auto I still have no signal when changing to H polarity. If I change symbol rate to 21.000 I get 97% S/Q but it doesn't lock on the satellite and comes up empty on a scan.

[johnnylarue]

Even when set to auto I still have no signal when changing to H polarity. If I change symbol rate to 21.000 I get 97% S/Q but it doesn't lock on the satellite and comes up empty on a scan.

I just tried it on my T5, and 12530 locks as a vertical TP, even though it is a 100% sure Horizontal TP. The problem is the channels don't scan because there is no FEC setting of 3/4A. It is a weird TP. They tweaked the rate upwards, but unfortunately T5 users might not be able scan this TP.

[n3fta]

I just tried it on my T5, and 12530 locks as a vertical TP, even though it is a 100% sure Horizontal TP. The problem is the channels don't scan because there is no FEC setting of 3/4A. It is a weird TP. They tweaked the rate upwards, but unfortunately T5 users might not be able scan this TP.

At least I still get MLB Network in SD. I'll keep my eye on this thread in case someone comes up with a solution.