discussion of bev tp changes

[jets]

1225 44 hour EPG 1522 9 day EPG. I think 1225 is TP12428. On the Viewsat's only way to get an EPG is native 225, 44 hour only.

[redrooster1]

Hey redrooster1. I believe you said the magic words in your previous post- Please be patient and let the dust settle! That's the best advice I can give you my friend. Anything that BEV does takes time and also testing on their part. Lets just wait and see how this ALL unfolds! I understand your frustration my friend but like the old-saying says- Patience is a virtue. My apologies if I interrupted this thread. Thanks and good luck to us all! Fishmaster.

thanks. ive been at this a long time, frustration doesnt happen anymore. sucks i lost fox news and my local news lol. I tried a blind scan on 91 and 82 nothing changed that i see so far. will drink watchin something else.lol

[redrooster1]

Figured it out. Once I made the changes the channels came up. The trick here is not to delete the channels or factory your Jynxbox. Just make the changes, never mind the scan and watch the missing channels. To bad the DL wasn't this easy.

so where do you see mode change to turbo. I dont completely understand how this works.

[auggie]

[QUOTE=redrooster1;1391339]so where do you see mode change to turbo. I dont completely understand how this works.

i don't have a Jynxbox, but most boxes it's located in the Dish settings list, under transponder # where you bring up

A transponder list 1-32 this is where you can edit the transponder etc.

[bigbro]

I remember whe the SV8000 hd lived past it's dream life.A group of guys rolled up their sleeves & got it done.Might be the situation here,but the uncertain future of bell iks might defeat the purpose.I think I will start a thread to see if anyone interested.I got my hands dirty on the SV porject, & learned enough to contribute.I have lots of hardware to break.lol.

I'm still using a SV8000 and a Sonicview 360 Premier. Now losing channels.

[jets]

I'm still using a SV8000 and a Sonicview 360 Premier. Now losing channels.

So you will need to re-scan the dead TP's using 21500 SR, 3/4A FEC and in TUBO8PSK mode. In manual scan on that STB if I remember correctly.

[dishuser]

not going to work on the 360 though
that one will be useless soon

[sat9182]

fyi

made in china . com and aliexpress .com have lots on jynks and knock offs available

[Rickhardmb]

Are all sd chanels down my hd is fine using a jynx box

[dishuser]

Are all sd chanels down my hd is fine using a jynx box

you need to make some changes
it's been posted many times in this thread

[buddy b]

Figured it out. Once I made the changes the channels came up. The trick here is not to delete the channels or factory your Jynxbox. Just make the changes, never mind the scan and watch the missing channels. To bad the DL wasn't this easy.

Agreed. Unfortunately I did a factory default. And when u try rescan.. u get nothing. Luckily I had an old jyxbox, and when I did the changes, 12500 and turbo.. most all channels are working. . I guess the next question is how do you transfer the channel data from one box to another?

[anthonym41]

is it 12500 or 21500 and turbo?

[NorthernPike]

is it 12500 or 21500 and turbo?

Hi, it's 21500 and turbo 3/4

[tvbob]

CMT on CH 575 is now gone on sat 91 as everybody here already knows.
Is it available or will it be available after the dust settles on viewsat HD boxes or sonicview hd8000.Thanks

[jets]

I have a jynxbox v6 HD, ive never been able to find fox in HD. I had it in SD up until today. hope its not gone. Biden and Trudeau fixing elections.

I have Fox news on a Jynxbox v6... Not that I watch it but it works here.